K&N Fuel Injection Performance Kits (FIPK’s) are built for many different vehicles and represent a dramatic improvement over a K&N O/E replacement filter alone; they use only non-metallic rotationally molded tubes that can reduce air temperature and decrease intake sound over a metal tube. Restriction can exist BETWEEN an air filter and the engine reducing the benefit of a K&N Air Filter. The weakest link in the airflow “chain” robs a vehicle of its natural horsepower. Often that weak point is the factory air path leading to the Engine. K&N Fuel Injection Performance Kits (FIPK) virtually eliminate air path restriction by replacing the air filter and the entire air path to the engine. The aerodynamically engineered tube drives a massive amount of air into an engine, which translates into POWER.
K&N Fuel Injection Performance Kits (FIPK) are truly state-of-the-art. K&N starts with the largest conical shaped high-flow air filter that can fit into the engine compartment while using factory holes and mounting points. This extra filter size provides even more airflow at lower restriction than a standard K&N O/E replacement filter that is limited to the size of the factory air box. The oversized air filter also captures and holds more dirt increasing the service life before a cleaning is required (up to 100,000 miles). When possible, the filter is isolated from high engine temperature by a heat shield designed to lower the temperature of the air entering the engine, which increases horsepower. Next the filter is attached to a rotationally molded tube made from interlaced High Density Polyethylene (HDPE). This process allows the tube to be precisely shaped to reduce turbulence and accelerate airflow into the engine. This is why some tubes have unique shapes that are specifically engineered for each application. Finally the tube is connected to the engine with adapters made from high strength materials such as silicon and reinforced nylon and ensures long life. Put all this together and you have the best high-flow intake system available today.

FEATURES

  • Guaranteed to Provide more HP and Increased Acceleration
  • Engineered to Specific Vehicle Design
  • Easy to Install, Usually in 90 minutes or less!
  • Lasts up to 100,000 Miles Before Service is Required (depending on driving conditions)
  • Million Mile Limited Warranty
  • Replaces OEM Filter and Air Box
  • Air Filter is Washable and Reusable
  • Works with Original Equipment Manufacturer Computer Systems
  • Designed to use Factory Holes & Mounting Points Whenever Possible
  • Most are CARB Exempt and street legal in all 50 US States

256 Items

//d5otzd52uv6zz.cloudfront.net/bd31a90e-4e63-4056-b217-fb5f14c81c37-50.jpg 57-0112 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-0112)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 3.375 in (86 mm)
Air Filter Large End Diameter : 5.5 in (140 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
California Restricted : Not legal for sale or use in California
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 1
Couplers Included : None
Intake Pipe Color / Finish : Black
Intake Pipe Material : Flex Hose
Mounting Hardware Included : Yes
Replacement Filter : RC-9460
Street Legal In All US States : No
TUV Approved (Europe) : No
Type : Gen I
Weight : 1.8 lb (0.8 kg)
//d5otzd52uv6zz.cloudfront.net/1f469f2e-f36a-44b0-b1a9-4598a86346f2-50.jpg 57-1000 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-1000)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 7.875 in (200 mm)
Air Filter Large End Diameter : 5 in (127 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-28
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 3
Couplers Included : 1
Estimated Horsepower Gain : 8.66 HP @ 6300 RPM
Horse Power Increase : 9 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RC-4690
RPM : 6300
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 9.3 lb (4.2 kg)
//d5otzd52uv6zz.cloudfront.net/51f9eb65-b059-4c00-9e98-1132b09895bc-50.jpg 57-1001 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-1001)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 6.5 in (165 mm)
Air Filter Large End Diameter : 5.5 in (140 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-31
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 3
Couplers Included : 1
Estimated Horsepower Gain : 11.46 HP @ 6030 RPM
Horse Power Increase : 11 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RC-4630
RPM : 6030
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 8.8 lb (4 kg)
//d5otzd52uv6zz.cloudfront.net/0fd6efc1-0090-489d-8202-19c28708dcad-50.jpg 57-1002 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-1002)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 6.5 in (165 mm)
Air Filter Large End Diameter : 6 in (152 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-31
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 3
Couplers Included : 1
Estimated Horsepower Gain : 9.69 HP @ 6090 RPM
Horse Power Increase : 10 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RU-4730
RPM : 6090
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 8.8 lb (4 kg)
//d5otzd52uv6zz.cloudfront.net/4446cc82-9f69-49dc-9cad-69025f96e94c-50.jpg 57-1003 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-1003)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 7 in (178 mm)
Air Filter Large End Diameter : 6.5 in (165 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-31
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 4
Couplers Included : 1
Estimated Horsepower Gain : 17.83 HP @ 7400 RPM
Horse Power Increase : 18 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RF-1032
RPM : 7400
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 10.1 lb (4.6 kg)
//d5otzd52uv6zz.cloudfront.net/group-9e77fa46-2f6c-4db0-9321-24541c4b98da-50.jpg 57-1126 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-1126)
FIPK Intake Kit
Fits Harley-Davidson
Air Filter Color : Red
Air Filter Height : 6 in (152 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-55
Clamp Material : Stainless Steel
Clamp Style : Worm Gear
Clamps Included : 2
Couplers Included : None
Estimated Horsepower Gain : 8.57 HP @ 5533 RPM
Horse Power Increase : 9 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : Aluminum
Mounting Hardware Included : Yes
Replacement Filter : RE-0960
RPM : 5533
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Weight : 2.7 lb (1.2 kg)
//d5otzd52uv6zz.cloudfront.net/group-9e77fa46-2f6c-4db0-9321-24541c4b98da-50.jpg 57-1129 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-1129)
FIPK Intake Kit
Fits Polaris Applications
Air Filter Color : Red
Air Filter Height : 6 in (152 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-51
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 6
Couplers Included : 1
Intake Pipe Color / Finish : Black
Intake Pipe Material : Aluminum
Mounting Hardware Included : Yes
Replacement Filter : RC-5062XD
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 9.8 lb (4.4 kg)
//d5otzd52uv6zz.cloudfront.net/73cd633d-0fa9-4e58-a2a0-f09c5b164f01-50.jpg 57-1500-1 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-1500-1)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 5 in (127 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Oval
CARB EO Number : D-269-15
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 1
Couplers Included : None
Mounting Hardware Included : Yes
Replacement Filter : RF-1001
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen I
Weight : 3.5 lb (1.6 kg)
//d5otzd52uv6zz.cloudfront.net/47df1812-b57e-4315-9876-2ca01538bb2b-50.jpg 57-1501 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-1501)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 2.813 in (71 mm)
Air Filter Inside Diameter : 12 in (305 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Not Flanged
CARB EO Number : D-269-10
Clamp Material : Stainless Steel
Clamp Style : Mini
Clamps Included : 1
Couplers Included : None
Estimated Horsepower Gain : 6.37 HP @ 4352 RPM
Horse Power Increase : 6 HP
Mounting Hardware Included : Yes
Replacement Filter : E-3742
RPM : 4352
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen I
Weight : 5.7 lb (2.6 kg)
//d5otzd52uv6zz.cloudfront.net/2c9d6c87-a05d-4a6a-a9ed-f343e576cb90-50.jpg 57-1502 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-1502)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 3.063 in (78 mm)
Air Filter Inside Diameter : 12 in (305 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Not Flanged
CARB EO Number : D-269-10
Clamp Material : Stainless Steel
Clamp Style : Mini
Clamps Included : 1
Couplers Included : None
Mounting Hardware Included : Yes
Replacement Filter : E-1650
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen I
Weight : 5.8 lb (2.6 kg)
//d5otzd52uv6zz.cloudfront.net/dc8326d1-82db-4fc6-b21f-182e47557d00-50.jpg 57-1506-2 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-1506-2)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 8 in (203 mm)
Air Filter Large End Diameter : 6.5 in (165 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-13
Clamp Material : Stainless Steel
Clamp Style : Mini
Clamps Included : 3
Couplers Included : None
Estimated Horsepower Gain : 24.74 HP @ 4335 RPM
Horse Power Increase : 25 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RF-1027
RPM : 4335
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 11.1 lb (5 kg)
//d5otzd52uv6zz.cloudfront.net/c8465be4-0c65-4155-8731-a13eabd59d07-50.jpg 57-1507 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-1507)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 8 in (203 mm)
Air Filter Large End Diameter : 6.5 in (165 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-22
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 7
Couplers Included : 3
Estimated Horsepower Gain : 15.79 HP @ 4128 RPM
Horse Power Increase : 16 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Oversize Shipping : OS1
Replacement Filter : RF-1027
RPM : 4128
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 16.4 lb (7.5 kg)
//d5otzd52uv6zz.cloudfront.net/8159c2da-c11e-44ad-b630-7961c8215241-50.jpg 57-1508 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-1508)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 7 in (178 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-14
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 6
Couplers Included : 3
Estimated Horsepower Gain : 13.39 HP @ 5363 RPM
Horse Power Increase : 13 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RF-1033
RPM : 5363
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 8.5 lb (3.8 kg)
//d5otzd52uv6zz.cloudfront.net/4133064f-84f6-4be5-84f1-38317ddb518d-50.jpg 57-1509-1 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-1509-1)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 7 in (178 mm)
Air Filter Large End Diameter : 6 in (152 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-14
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 2
Couplers Included : None
Estimated Horsepower Gain : 10.74 HP @ 4580 RPM
Horse Power Increase : 11 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RC-4680
RPM : 4580
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 10.4 lb (4.7 kg)
//d5otzd52uv6zz.cloudfront.net/1c6dc79a-d8e4-444d-8ce3-989d0c08499f-50.jpg 57-1511-2 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-1511-2)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 7 in (178 mm)
Air Filter Large End Diameter : 6 in (152 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-25
Clamp Material : Stainless Steel
Clamp Style : Mini
Clamps Included : 5
Couplers Included : 2
Estimated Horsepower Gain : 11.81 HP @ 4248 RPM
Horse Power Increase : 12 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RC-4680
RPM : 4248
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 13.4 lb (6.1 kg)
//d5otzd52uv6zz.cloudfront.net/64ae18a0-2e4f-4916-ac6a-413b93cae72e-50.jpg 57-1512 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-1512)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 6 in (152 mm)
Air Filter Large End Diameter : 5 in (127 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-15
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 5
Couplers Included : 1
Estimated Horsepower Gain : 6.02 HP @ 5810 RPM
Horse Power Increase : 6 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RF-1039
RPM : 5810
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 10 lb (4.5 kg)
//d5otzd52uv6zz.cloudfront.net/e6be4b04-de9d-40af-aff8-11e1fb1e242f-50.jpg 57-1513-1 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-1513-1)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 8 in (203 mm)
Air Filter Large End Diameter : 5.5 in (140 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-28
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 4
Couplers Included : 1
Estimated Horsepower Gain : 13.10 HP @ 4765 RPM
Horse Power Increase : 13 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RF-1045
RPM : 4765
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 10.8 lb (4.9 kg)
//d5otzd52uv6zz.cloudfront.net/63171277-3bc0-41ab-ba7a-27c6cc4d4b45-50.jpg 57-1514-1 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-1514-1)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 8 in (203 mm)
Air Filter Large End Diameter : 5.5 in (140 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-34
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 4
Couplers Included : 1
Estimated Horsepower Gain : 12.13 HP @ 4623 RPM
Horse Power Increase : 12 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RF-1045
RPM : 4623
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 11 lb (5 kg)
//d5otzd52uv6zz.cloudfront.net/9ef7e402-c17f-45ce-acd7-058b662ccd41-50.jpg 57-1515-1 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-1515-1)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 5.5 in (140 mm)
Air Filter Large End Diameter : 5.375 in (137 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-31
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 4
Couplers Included : 1
Estimated Horsepower Gain : 5.89 HP @ 5486 RPM
Horse Power Increase : 6 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RP-4660
RPM : 5486
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 7.4 lb (3.4 kg)
//d5otzd52uv6zz.cloudfront.net/dffbaeed-c1fb-4872-91a4-711c62e7285f-50.jpg 57-1516 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-1516)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 5.5 in (140 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-28
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 4
Couplers Included : 1
Estimated Horsepower Gain : 8.01 HP @ 4470 RPM
Horse Power Increase : 8 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RC-5040
RPM : 4470
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 11.4 lb (5.2 kg)
//d5otzd52uv6zz.cloudfront.net/68e59087-d08c-455e-868a-b37bdda280bb-50.jpg 57-1517-2 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-1517-2)
FIPK Intake Kit
w/ Intake Tube
Air Filter Color : Red
Air Filter Height : 7 in (178 mm)
Air Filter Large End Diameter : 6 in (152 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-25
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 2
Couplers Included : None
Estimated Horsepower Gain : 11.68 HP @ 4553 RPM
Horse Power Increase : 12 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RC-4680
RPM : 4553
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 10.4 lb (4.7 kg)
//d5otzd52uv6zz.cloudfront.net/cb4ba538-1564-4e37-9d53-8bc9ca65a59d-50.jpg 57-1518 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-1518)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 7.875 in (200 mm)
Air Filter Large End Diameter : 5 in (127 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-18
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 3
Couplers Included : 1
Estimated Horsepower Gain : 7.9 HP @ 4511 RPM
Horse Power Increase : 8 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RC-4690
RPM : 4511
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 7.4 lb (3.4 kg)
//d5otzd52uv6zz.cloudfront.net/3a2a3fda-6333-45c3-a35c-95cd73bb5a22-50.jpg 57-1519 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-1519)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 7.875 in (200 mm)
Air Filter Large End Diameter : 5 in (127 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-19
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 3
Couplers Included : 1
Estimated Horsepower Gain : 7.09 HP @ 4548 RPM
Horse Power Increase : 7 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RC-4690
RPM : 4548
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 7.4 lb (3.4 kg)
//d5otzd52uv6zz.cloudfront.net/ba40b338-84b9-401a-87c1-15df531a3131-50.jpg 57-1520 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-1520)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 7.875 in (200 mm)
Air Filter Large End Diameter : 5 in (127 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-19
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 3
Couplers Included : 1
Estimated Horsepower Gain : 7.71 HP @ 4684 RPM
Horse Power Increase : 8 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RC-4690
RPM : 4684
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 10.4 lb (4.7 kg)
//d5otzd52uv6zz.cloudfront.net/2e5b501a-c83e-48b3-a0ff-7455b5963cd7-50.jpg 57-1521 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-1521)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 6.5 in (165 mm)
Air Filter Large End Diameter : 5.5 in (140 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-22
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 4
Couplers Included : 2
Estimated Horsepower Gain : 12.65 HP @ 4800 RPM
Horse Power Increase : 13 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RC-4630
RPM : 4800
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 11.7 lb (5.3 kg)
//d5otzd52uv6zz.cloudfront.net/d6bc673a-8aad-480a-ad86-4a18cc077dc0-50.jpg 57-1522 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-1522)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 6.5 in (165 mm)
Air Filter Large End Diameter : 6 in (152 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-28
Clamp Material : Stainless Steel
Clamp Style : MIDI
Clamps Included : 2
Couplers Included : None
Estimated Horsepower Gain : 8.46 HP @ 5482 RPM
Horse Power Increase : 8 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RX-4730
RPM : 5482
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 8.7 lb (4 kg)
//d5otzd52uv6zz.cloudfront.net/5c8b9cbf-5dd5-4257-b379-6e9560c3e84f-50.jpg 57-1523 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-1523)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 6.5 in (165 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-28
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 2
Couplers Included : None
Estimated Horsepower Gain : 4.45 HP @ 5939 RPM
Horse Power Increase : 4 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RX-4730
RPM : 5939
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 8.6 lb (3.9 kg)
//d5otzd52uv6zz.cloudfront.net/faa913a2-3f47-41c9-ba61-a0a036e61552-50.jpg 57-1525 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-1525)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 9.5 in (241 mm)
Air Filter Large End Diameter : 6.625 in (168 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-22
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 4
Couplers Included : 1
Estimated Horsepower Gain : 9.17 HP @ 2560 RPM
Horse Power Increase : 9 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RC-4780
RPM : 2560
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 12.3 lb (5.6 kg)
//d5otzd52uv6zz.cloudfront.net/b97cdf53-5a74-49bc-87a5-d85cc3f1543d-50.jpg 57-1526 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-1526)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 6.75 in (171 mm)
Air Filter Large End Diameter : 6 in (152 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-28
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 3
Couplers Included : 1
Estimated Horsepower Gain : 7.73 HP @ 4711 RPM
Horse Power Increase : 8 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RC-4700
RPM : 4711
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 10.4 lb (4.7 kg)
//d5otzd52uv6zz.cloudfront.net/1eeef6d8-d8ef-4700-8e46-72c49e5c45ac-50.jpg 57-1527-1 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-1527-1)
FIPK Intake Kit
w/ Intake Tube
Air Filter Color : Red
Air Filter Height : 7 in (178 mm)
Air Filter Large End Diameter : 6 in (152 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-26
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 2
Couplers Included : 1
Estimated Horsepower Gain : 5.33 HP @ 3884 RPM
Horse Power Increase : 5 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RC-4680
RPM : 3884
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 15 lb (6.8 kg)
//d5otzd52uv6zz.cloudfront.net/8466e698-d096-4b56-aac1-462f76379d9c-50.jpg 57-1528 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-1528)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 6 in (152 mm)
Air Filter Large End Diameter : 6.5 in (165 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-26
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 4
Couplers Included : 1
Estimated Horsepower Gain : 8.5 HP @ 5047 RPM
Horse Power Increase : 9 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RC-5060
RPM : 5047
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 9 lb (4.1 kg)
//d5otzd52uv6zz.cloudfront.net/1b1a5f7d-dd33-4b71-b974-8b57d051439c-50.jpg 57-1529 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-1529)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 7.5 in (191 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-54
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 4
Couplers Included : 1
Estimated Horsepower Gain : 8.63 HP @ 4688 RPM
Horse Power Increase : 9 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RF-1040
RPM : 4688
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 13.2 lb (6 kg)
//d5otzd52uv6zz.cloudfront.net/fff0d54b-dd7f-4930-b681-4d6f8358c9ff-50.jpg 57-1530-1 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-1530-1)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 8 in (203 mm)
Air Filter Large End Diameter : 7.5 in (191 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-31
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 4
Couplers Included : 1
Estimated Horsepower Gain : 8.74 HP @ 4362 RPM
Horse Power Increase : 9 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Oversize Shipping : OS1
Replacement Filter : RF-1020
RPM : 4362
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 15.3 lb (6.9 kg)
//d5otzd52uv6zz.cloudfront.net/464b99a2-319c-454c-bf38-43e5592da09b-50.jpg 57-1531 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-1531)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 5.5 in (140 mm)
Air Filter Large End Diameter : 5.375 in (137 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-31
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 3
Couplers Included : 1
Estimated Horsepower Gain : 12 HP @ 5086 RPM
Horse Power Increase : 12 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RP-4660
RPM : 5086
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 7.8 lb (3.5 kg)
//d5otzd52uv6zz.cloudfront.net/ba42b4a7-f02c-4610-be81-a46356af7a82-50.jpg 57-1532 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-1532)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 9.5 in (241 mm)
Air Filter Large End Diameter : 6.625 in (168 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-34
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 5
Couplers Included : 1
Estimated Horsepower Gain : 10.96 HP @ 2852 RPM
Horse Power Increase : 11 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RC-4780
RPM : 2852
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 10.5 lb (4.8 kg)
//d5otzd52uv6zz.cloudfront.net/12112480-7001-48f6-9b5b-e6ad36d546fb-50.jpg 57-1533 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-1533)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 7.5 in (191 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-37
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 4
Couplers Included : 1
Estimated Horsepower Gain : 10.48 HP @ 5445 RPM
Horse Power Increase : 10 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RF-1040
RPM : 5445
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 14.2 lb (6.4 kg)
//d5otzd52uv6zz.cloudfront.net/e79d2795-f387-40e9-b094-1e984841c839-50.jpg 57-1534 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-1534)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 6 in (152 mm)
Air Filter Large End Diameter : 5.375 in (137 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Not Flanged
CARB EO Number : D-269-31
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 2
Couplers Included : 1
Estimated Horsepower Gain : 4.85 HP @ 5600 RPM
Horse Power Increase : 5 HP
Mounting Hardware Included : Yes
Replacement Filter : RU-5141
RPM : 5600
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 8.5 lb (3.9 kg)
//d5otzd52uv6zz.cloudfront.net/c194b7f5-5b25-4fae-a30e-b7a6868bf9ca-50.jpg 57-1535 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-1535)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 5.5 in (140 mm)
Air Filter Large End Diameter : 5.375 in (137 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-31
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 5
Couplers Included : 1
Estimated Horsepower Gain : 9.76 HP @ 5500 RPM
Horse Power Increase : 10 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RP-4660
RPM : 5500
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 11.1 lb (5 kg)
//d5otzd52uv6zz.cloudfront.net/34f0c9f1-b347-4b4e-8c59-df6f3aa0182f-50.jpg 57-1536 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-1536)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 7 in (178 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-34
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 3
Couplers Included : 1
Estimated Horsepower Gain : 14.06 HP @ 5300 RPM
Horse Power Increase : 14 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RX-2820
RPM : 5300
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 7.3 lb (3.3 kg)
//d5otzd52uv6zz.cloudfront.net/62eec252-e04f-4bb1-a90a-d090f1307cca-50.jpg 57-1537 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-1537)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 7.5 in (191 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-37
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 4
Couplers Included : 1
Estimated Horsepower Gain : 7.38 HP @ 5223 RPM
Horse Power Increase : 7 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RF-1040
RPM : 5223
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 15.6 lb (7.1 kg)
//d5otzd52uv6zz.cloudfront.net/6fb8b2ad-42ff-4e7a-95c2-5b3cd0a6477d-50.jpg 57-1538 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-1538)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 5 in (127 mm)
Air Filter Large End Diameter : 7.5 in (191 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-37
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 6
Couplers Included : 2
Estimated Horsepower Gain : 16.75 HP @ 4588 RPM
Horse Power Increase : 17 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RC-5138
RPM : 4588
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 10.8 lb (4.9 kg)
//d5otzd52uv6zz.cloudfront.net/cc2cbe6a-7518-4d28-9997-8824b161d623-50.jpg 57-1539 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-1539)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 5 in (127 mm)
Air Filter Large End Diameter : 7.5 in (191 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-38
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 6
Couplers Included : 2
Estimated Horsepower Gain : 17.54 HP @ 5053 RPM
Horse Power Increase : 18 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RC-5138
RPM : 5053
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 10.8 lb (4.9 kg)
//d5otzd52uv6zz.cloudfront.net/5e43e73d-e025-48a1-997c-d138aff7f51b-50.jpg 57-1540 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-1540)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 6 in (152 mm)
Air Filter Large End Diameter : 7.5 in (191 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-34
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 6
Couplers Included : 3
Estimated Horsepower Gain : 6.36 HP @ 5274 RPM
Horse Power Increase : 6 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RF-1048
RPM : 5274
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 9.5 lb (4.3 kg)
//d5otzd52uv6zz.cloudfront.net/80a3dc1a-37b2-4513-b41b-b19786cf804f-50.jpg 57-1541 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-1541)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 10 in (254 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-34
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 4
Couplers Included : 2
Estimated Horsepower Gain : 19.82 HP @ 4867 RPM
Horse Power Increase : 20 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RF-1024
RPM : 4867
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 17.1 lb (7.8 kg)
//d5otzd52uv6zz.cloudfront.net/de41ef23-cee0-45c7-bbcf-c454e7be5982-50.jpg 57-1542 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-1542)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 6.5 in (165 mm)
Air Filter Large End Diameter : 7.5 in (191 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-58
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 6
Couplers Included : 2
Estimated Horsepower Gain : 21.09 HP @ 5216 RPM
Horse Power Increase : 21 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RF-1042
RPM : 5216
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 10.4 lb (4.7 kg)
//d5otzd52uv6zz.cloudfront.net/50d1a33d-7593-4901-9a21-2a5f6de6de09-50.jpg 57-1543 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-1543)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 6 in (152 mm)
Air Filter Large End Diameter : 7.5 in (191 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-37
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 6
Couplers Included : 2
Estimated Horsepower Gain : 11.68 HP @ 6215 RPM
Horse Power Increase : 12 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RF-1048
RPM : 6215
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 9.7 lb (4.4 kg)
//d5otzd52uv6zz.cloudfront.net/187fe517-505b-4dbc-8839-35154566de9d-50.jpg 57-1544 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-1544)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 6 in (152 mm)
Air Filter Large End Diameter : 7.5 in (191 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-37
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 6
Couplers Included : 2
Estimated Horsepower Gain : 7.3 HP @ 5693 RPM
Horse Power Increase : 7 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RF-1048
RPM : 5693
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 9.7 lb (4.4 kg)
//d5otzd52uv6zz.cloudfront.net/b9ae583c-6426-42d1-9465-3bae90852762-50.jpg 57-1545 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-1545)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 6 in (152 mm)
Air Filter Large End Diameter : 7.5 in (191 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-37
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 6
Couplers Included : 2
Estimated Horsepower Gain : 7.55 HP @ 5132 RPM
Horse Power Increase : 8 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RF-1048
RPM : 5132
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 9.1 lb (4.1 kg)
//d5otzd52uv6zz.cloudfront.net/ae34deed-f888-43a8-aa7a-c6d76940c5e2-50.jpg 57-1546 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-1546)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 6 in (152 mm)
Air Filter Large End Diameter : 7.5 in (191 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-37
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 6
Couplers Included : 2
Estimated Horsepower Gain : 9.17 HP @ 4524 RPM
Horse Power Increase : 9 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RF-1048
RPM : 4524
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 11.8 lb (5.4 kg)
//d5otzd52uv6zz.cloudfront.net/3c705b3f-4842-40be-95be-880fab54eb70-50.jpg 57-1547 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-1547)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 6 in (152 mm)
Air Filter Large End Diameter : 7.5 in (191 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-34
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 6
Couplers Included : 2
Estimated Horsepower Gain : 8.68 HP @ 4749 RPM
Horse Power Increase : 9 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RF-1048
RPM : 4749
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 11.5 lb (5.2 kg)
//d5otzd52uv6zz.cloudfront.net/091d6f93-915b-45aa-975a-0cad456c3363-50.jpg 57-1548 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-1548)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 6 in (152 mm)
Air Filter Large End Diameter : 7.5 in (191 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-37
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 6
Couplers Included : 2
Estimated Horsepower Gain : 9.47 HP @ 4397 RPM
Horse Power Increase : 9 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RF-1048
RPM : 4397
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 11.5 lb (5.2 kg)
//d5otzd52uv6zz.cloudfront.net/cfe627ad-70b1-487c-b93a-8105d57dcfc7-50.jpg 57-1549 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-1549)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 6 in (152 mm)
Air Filter Large End Diameter : 7.5 in (191 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-38
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 6
Couplers Included : 2
Estimated Horsepower Gain : 15.3 HP @ 5046 RPM
Horse Power Increase : 15 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RF-1048
RPM : 5046
Street Legal In All US States : See Application Link Above
TUV Approved (Europe) : No
Type : Gen II
Weight : 11.1 lb (5 kg)
//d5otzd52uv6zz.cloudfront.net/a884b414-0c4c-48ff-869e-8d0e67113138-50.jpg 57-1550 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-1550)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 5.5 in (140 mm)
Air Filter Large End Diameter : 5.375 in (137 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-37
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 4
Couplers Included : 1
Estimated Horsepower Gain : 7.17 HP @ 5004 RPM
Horse Power Increase : 7 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RP-4660
RPM : 5004
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 7.5 lb (3.4 kg)
//d5otzd52uv6zz.cloudfront.net/39770e5f-c193-4624-a2ab-78bfc61035b3-50.jpg 57-1551 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-1551)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 5.5 in (140 mm)
Air Filter Large End Diameter : 5.375 in (137 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-37
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 3
Couplers Included : 1
Estimated Horsepower Gain : 12.13 HP @ 5086 RPM
Horse Power Increase : 12 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RP-4660
RPM : 5086
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 7 lb (3.2 kg)
//d5otzd52uv6zz.cloudfront.net/f8e7bbb6-a5b4-4910-bf97-3ca7ac5cd07e-50.jpg 57-1552 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-1552)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 6.5 in (165 mm)
Air Filter Large End Diameter : 6 in (152 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-37
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 4
Couplers Included : 1
Estimated Horsepower Gain : 7.94 HP @ 4557 RPM
Horse Power Increase : 8 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RU-4730
RPM : 4557
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 9.4 lb (4.3 kg)
//d5otzd52uv6zz.cloudfront.net/fee3efe9-5847-46f4-a2c8-d4340cc7354a-50.jpg 57-1553 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-1553)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 6 in (152 mm)
Air Filter Large End Diameter : 7.5 in (191 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-38
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 6
Couplers Included : 2
Estimated Horsepower Gain : 8.17 HP @ 4807 RPM
Horse Power Increase : 8 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RF-1048
RPM : 4807
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 9.8 lb (4.4 kg)
//d5otzd52uv6zz.cloudfront.net/4514ec8b-7d79-408e-8a05-d4565a886bd9-50.jpg 57-1554 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-1554)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 7.5 in (191 mm)
Air Filter Large End Diameter : 7.5 in (191 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-37
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 6
Couplers Included : 2
Estimated Horsepower Gain : 11.7 HP @ 4270 RPM
Horse Power Increase : 12 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RF-1041
RPM : 4270
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 12.6 lb (5.7 kg)
//d5otzd52uv6zz.cloudfront.net/f05b88d8-91aa-48f5-ad5b-52b730d58f84-50.jpg 57-1556 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-1556)
FIPK Intake Kit
w/ Intake Tube
Air Filter Color : Red
Air Filter Height : 6.5 in (165 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-38
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 6
Couplers Included : 2
Estimated Horsepower Gain : 8.7 HP @ 5006 RPM
Horse Power Increase : 9 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RF-1042
RPM : 5006
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 9.7 lb (4.4 kg)
//d5otzd52uv6zz.cloudfront.net/a12b1044-5bcd-428e-990d-04189e1a51a0-50.jpg 57-1557 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-1557)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 8 in (203 mm)
Air Filter Large End Diameter : 8 in (203 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-36
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 4
Couplers Included : 1
Estimated Horsepower Gain : 20.63 HP @ 2500 RPM
Horse Power Increase : 21 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RC-5142
RPM : 2500
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 13.9 lb (6.3 kg)
//d5otzd52uv6zz.cloudfront.net/64c9b8c0-42d2-4b6f-a298-c3691dd4bf1f-50.jpg 57-1558 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-1558)
FIPK Intake Kit
w/ Intake Tube
Air Filter Color : Red
Air Filter Height : 6 in (152 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-37
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 6
Couplers Included : 2
Estimated Horsepower Gain : 9.22 HP @ 4200 RPM
Horse Power Increase : 9 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RF-1048
RPM : 4200
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 12 lb (5.4 kg)
//d5otzd52uv6zz.cloudfront.net/143f25d7-8419-4220-85ba-d4af1df93c88-50.jpg 57-1559 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-1559)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 6 in (152 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-37
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 5
Couplers Included : 2
Estimated Horsepower Gain : 11.25 HP @ 4800 RPM
Horse Power Increase : 11 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RF-1048
RPM : 4800
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 12.2 lb (5.5 kg)
//d5otzd52uv6zz.cloudfront.net/322e5d48-9710-4393-b67e-27e0f3255c27-50.jpg 57-1560 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-1560)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 5 in (127 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-37
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 4
Couplers Included : 1
Estimated Horsepower Gain : 10.85 HP @ 5500 RPM
Horse Power Increase : 11 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RU-3570
RPM : 5500
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 10.1 lb (4.6 kg)
//d5otzd52uv6zz.cloudfront.net/group-9e77fa46-2f6c-4db0-9321-24541c4b98da-50.jpg 57-1565 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-1565)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-54/D-269-58
Clamp Material : Steel
Clamp Style : Regular
Clamps Included : 6
Couplers Included : 2
Estimated Horsepower Gain : 21.95 HP @ 5216 RPM
Horse Power Increase : 22 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RF-1042
RPM : 5216
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 9.6 lb (4.3 kg)
//d5otzd52uv6zz.cloudfront.net/group-9e77fa46-2f6c-4db0-9321-24541c4b98da-50.jpg 57-1566 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-1566)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 6 in (152 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-58
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 5
Couplers Included : 2
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RF-1048
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 10.8 lb (4.9 kg)
//d5otzd52uv6zz.cloudfront.net/e00cf5cd-12a4-47fc-92c1-1964731c413f-50.jpg 57-2500 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-2500)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 3 in (76 mm)
Air Filter Large End Diameter : 7.5 in (191 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Not Flanged
CARB EO Number : D-269-8
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 1
Couplers Included : None
Mounting Hardware Included : Yes
Replacement Filter : RF-1028
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen I
Weight : 4 lb (1.8 kg)
//d5otzd52uv6zz.cloudfront.net/89a93fd9-7f9d-42d3-a2ab-11ecf0aab921-50.jpg 57-2501 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-2501)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 8 in (203 mm)
Air Filter Large End Diameter : 5.75 in (146 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-8
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 1
Couplers Included : None
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RF-1003
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen I
Weight : 3.8 lb (1.7 kg)
//d5otzd52uv6zz.cloudfront.net/29612847-51f2-4cd9-ae88-a5d5b345ebb0-50.jpg 57-2502 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-2502)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 12.125 in (308 mm)
Air Filter Large End Diameter : 5.75 in (146 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Not Flanged
CARB EO Number : D-269-8
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 1
Couplers Included : None
Estimated Horsepower Gain : 6.81 HP @ 4706 RPM
Horse Power Increase : 7 HP
Mounting Hardware Included : Yes
Replacement Filter : RF-1004
RPM : 4706
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen I
Weight : 3.7 lb (1.7 kg)
//d5otzd52uv6zz.cloudfront.net/480a4a1d-6fee-49cb-8602-e24c92bed5af-50.jpg 57-2503 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-2503)
FIPK Intake Kit
w/o Intake Tube
Air Filter Color : Red
Air Filter Height : 9 in (229 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Not Flanged
CARB EO Number : D-269-17
Clamp Material : Stainless Steel
Clamp Style : Mini
Clamps Included : 5
Couplers Included : None
Estimated Horsepower Gain : 5.32 HP @ 3654 RPM
Horse Power Increase : 5 HP
Mounting Hardware Included : Yes
Replacement Filter : RF-1012
RPM : 3654
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen I
Weight : 6 lb (2.7 kg)
//d5otzd52uv6zz.cloudfront.net/09c8e40b-510d-41b4-8d25-d469265ac3ae-50.jpg 57-2505-1 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-2505-1)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 7 in (178 mm)
Air Filter Large End Diameter : 5.75 in (146 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Not Flanged
CARB EO Number : D-269-12
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 1
Couplers Included : None
Estimated Horsepower Gain : 4.7 HP @ 3418 RPM
Horse Power Increase : 5 HP
Mounting Hardware Included : Yes
Replacement Filter : RF-1016
RPM : 3418
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen I
Weight : 3 lb (1.4 kg)
//d5otzd52uv6zz.cloudfront.net/607a11ea-276a-4a74-a288-5c5174c004fb-50.jpg 57-2507 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-2507)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 8 in (203 mm)
Air Filter Large End Diameter : 5.5 in (140 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Not Flanged
CARB EO Number : D-269-12
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 1
Couplers Included : None
Mounting Hardware Included : Yes
Replacement Filter : RF-1025
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen I
Weight : 2.8 lb (1.3 kg)
//d5otzd52uv6zz.cloudfront.net/849acb7d-4c14-47a2-8aba-1c127e470b0a-50.jpg 57-2510-1 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-2510-1)
FIPK Intake Kit
w/o Intake Tube
Air Filter Color : Red
Air Filter Height : 8 in (203 mm)
Air Filter Large End Diameter : 7.5 in (191 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Not Flanged
CARB EO Number : D-269-12
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 1
Couplers Included : None
Estimated Horsepower Gain : 9.65 HP @ 4313 RPM
Horse Power Increase : 10 HP
Mounting Hardware Included : Yes
Replacement Filter : RF-1017
RPM : 4313
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen I
Weight : 5.1 lb (2.3 kg)
//d5otzd52uv6zz.cloudfront.net/4b15604b-2362-44ae-b987-e75e840f72fb-50.jpg 57-2511 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-2511)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 6.5 in (165 mm)
Air Filter Large End Diameter : 7.5 in (191 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-8
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 1
Couplers Included : None
Estimated Horsepower Gain : 12.98 HP @ 4801 RPM
Horse Power Increase : 13 HP
Mounting Hardware Included : Yes
Replacement Filter : RF-1014
RPM : 4801
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen I
Weight : 5.1 lb (2.3 kg)
//d5otzd52uv6zz.cloudfront.net/d07b055f-d8e8-40af-a1f8-d5f2a02e069c-50.jpg 57-2513-1 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-2513-1)
FIPK Intake Kit
w/o Intake Tube
Air Filter Color : Red
Air Filter Height : 6.5 in (165 mm)
Air Filter Large End Diameter : 7.5 in (191 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-12
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 2
Couplers Included : None
Mounting Hardware Included : Yes
Replacement Filter : RF-1014
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen I
Weight : 5.5 lb (2.5 kg)
//d5otzd52uv6zz.cloudfront.net/c861b4b0-b922-4485-8a07-4bc76e079d04-50.jpg 57-2514-4 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-2514-4)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 8 in (203 mm)
Air Filter Large End Diameter : 7.5 in (191 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-20
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 8
Couplers Included : 3
Estimated Horsepower Gain : 9.78 HP @ 4198 RPM
Horse Power Increase : 10 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RF-1020
RPM : 4198
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 8.8 lb (4 kg)
//d5otzd52uv6zz.cloudfront.net/a46092c8-ade4-4b2a-9c98-7831d38afe24-50.jpg 57-2516 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-2516)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 11 in (279 mm)
Air Filter Large End Diameter : 7.5 in (191 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Not Flanged
CARB EO Number : D-269-12
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 1
Couplers Included : None
Mounting Hardware Included : Yes
Replacement Filter : RF-1026
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen I
Weight : 5.2 lb (2.4 kg)
//d5otzd52uv6zz.cloudfront.net/5110a1ed-d925-43c1-9835-f1525d24906e-50.jpg 57-2517 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-2517)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 8 in (203 mm)
Air Filter Large End Diameter : 5.75 in (146 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-12
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 1
Couplers Included : None
Estimated Horsepower Gain : 6.29 HP @ 4296 RPM
Horse Power Increase : 6 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RF-1003
RPM : 4296
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen I
Weight : 3.8 lb (1.7 kg)
//d5otzd52uv6zz.cloudfront.net/e1a583cd-6ef7-46ac-8bdb-7cae6a65dc93-50.jpg 57-2519-3 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-2519-3)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 6 in (152 mm)
Air Filter Large End Diameter : 7.5 in (191 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-28
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 7
Couplers Included : 2
Estimated Horsepower Gain : 10.07 HP @ 4945 RPM
Horse Power Increase : 10 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RF-1036
RPM : 4945
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 9.8 lb (4.4 kg)
//d5otzd52uv6zz.cloudfront.net/2e7c120f-d95c-47cc-8a8a-94fc57c4d509-50.jpg 57-2523-2 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-2523-2)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 6 in (152 mm)
Air Filter Large End Diameter : 7.5 in (191 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-25
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 1
Couplers Included : None
Estimated Horsepower Gain : 12.05 HP @ 5860 RPM
Horse Power Increase : 12 HP
Mounting Hardware Included : Yes
Replacement Filter : RF-1048
RPM : 5860
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 6.5 lb (3 kg)
//d5otzd52uv6zz.cloudfront.net/9daa2477-f187-4d77-a53e-75046b4c94fe-50.jpg 57-2524-2 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-2524-2)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 8 in (203 mm)
Air Filter Large End Diameter : 7.5 in (191 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-31
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 7
Couplers Included : 2
Estimated Horsepower Gain : 12.0 HP @ 4140 RPM
Horse Power Increase : 12 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RF-1044
RPM : 4140
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 12.1 lb (5.5 kg)
//d5otzd52uv6zz.cloudfront.net/c79a78f4-006f-47c4-a4f5-f5885c2ee378-50.jpg 57-2525-2 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-2525-2)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 8 in (203 mm)
Air Filter Large End Diameter : 7.5 in (191 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-31
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 7
Couplers Included : 2
Estimated Horsepower Gain : 11.61 HP @ 4480 RPM
Horse Power Increase : 12 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RF-1044
RPM : 4480
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 10.8 lb (4.9 kg)
//d5otzd52uv6zz.cloudfront.net/d0740f9c-ec85-45fa-97a2-11f5d5ba5f60-50.jpg 57-2526-2 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-2526-2)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 6 in (152 mm)
Air Filter Large End Diameter : 5.875 in (149 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-28
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 5
Couplers Included : 2
Estimated Horsepower Gain : 3.23 HP @ 5100 RPM
Horse Power Increase : 3 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RP-4740
RPM : 5100
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 6.9 lb (3.1 kg)
//d5otzd52uv6zz.cloudfront.net/cc87290b-14c0-4f5b-96c3-7bf5248d0ac7-50.jpg 57-2527 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-2527)
FIPK Intake Kit
w/ Panel Filter
Air Filter Color : Red
Air Filter Height : 6 in (152 mm)
Air Filter Large End Diameter : 7.5 in (191 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-18
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 6
Couplers Included : 2
Estimated Horsepower Gain : 3.2 HP @ 3969 RPM
Horse Power Increase : 3 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RF-1048
RPM : 3969
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 8.4 lb (3.8 kg)
//d5otzd52uv6zz.cloudfront.net/5e7a7014-0d9d-4ab8-b5fc-34daaadd880b-50.jpg 57-2528 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-2528)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 6 in (152 mm)
Air Filter Large End Diameter : 7.5 in (191 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-18
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 6
Couplers Included : 2
Estimated Horsepower Gain : 8.59 HP @ 5303 RPM
Horse Power Increase : 9 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RF-1048
RPM : 5303
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 8.4 lb (3.8 kg)
//d5otzd52uv6zz.cloudfront.net/535ae716-5d5d-4c22-b68f-e74f6a49d1bb-50.jpg 57-2529-1 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-2529-1)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 6 in (152 mm)
Air Filter Large End Diameter : 7.5 in (191 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-28
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 6
Couplers Included : 2
Estimated Horsepower Gain : 6.89 HP @ 5244 RPM
Horse Power Increase : 7 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RF-1048
RPM : 5244
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 8.4 lb (3.8 kg)
//d5otzd52uv6zz.cloudfront.net/bfee8e3c-9148-4a9d-a812-29b00718e25a-50.jpg 57-2530 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-2530)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 9.5 in (241 mm)
Air Filter Large End Diameter : 6.625 in (168 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-25
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 4
Couplers Included : 1
Estimated Horsepower Gain : 14.88 HP @ 2925 RPM
Horse Power Increase : 15 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RC-4780
RPM : 2925
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 10.3 lb (4.7 kg)
//d5otzd52uv6zz.cloudfront.net/19fc9795-1b1a-48ae-a12f-9872f33e34fb-50.jpg 57-2531 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-2531)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 9.5 in (241 mm)
Air Filter Large End Diameter : 6.625 in (168 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-22
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 4
Couplers Included : 1
Estimated Horsepower Gain : 9.77 HP @ 3022 RPM
Horse Power Increase : 10 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RC-4780
RPM : 3022
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 14.6 lb (6.6 kg)
//d5otzd52uv6zz.cloudfront.net/75e653e0-bf37-482e-9152-4238f5dc5c7a-50.jpg 57-2532 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-2532)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 6 in (152 mm)
Air Filter Large End Diameter : 7.5 in (191 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-28
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 5
Couplers Included : 3
Estimated Horsepower Gain : 6.87 HP @ 4825 RPM
Horse Power Increase : 7 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RC-4940
RPM : 4825
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 9.7 lb (4.4 kg)
//d5otzd52uv6zz.cloudfront.net/e8204956-a303-4441-a6f3-b6c502edd68a-50.jpg 57-2533 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-2533)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 6.5 in (165 mm)
Air Filter Large End Diameter : 6 in (152 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-22
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 5
Couplers Included : 2
Estimated Horsepower Gain : 5.55 HP @ 4721 RPM
Horse Power Increase : 6 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RX-4730
RPM : 4721
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 10 lb (4.5 kg)
//d5otzd52uv6zz.cloudfront.net/e8109444-eeac-4f0f-bb8b-d864f28dc0e3-50.jpg 57-2534 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-2534)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 6.5 in (165 mm)
Air Filter Large End Diameter : 6 in (152 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-22
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 7
Couplers Included : 3
Estimated Horsepower Gain : 8.93 HP @ 6189 RPM
Horse Power Increase : 9 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RX-4730
RPM : 6189
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 9.2 lb (4.2 kg)
//d5otzd52uv6zz.cloudfront.net/174db035-0843-4239-a2cb-4c89d7c42d57-50.jpg 57-2535 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-2535)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 6.5 in (165 mm)
Air Filter Large End Diameter : 6.5 in (165 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-22
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 6
Couplers Included : 2
Estimated Horsepower Gain : 6.12 HP @ 5200 RPM
Horse Power Increase : 6 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RF-1037
RPM : 5200
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 9.6 lb (4.3 kg)
//d5otzd52uv6zz.cloudfront.net/f527bd13-558d-4b5b-bb08-e5687dcb2ea4-50.jpg 57-2536 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-2536)
FIPK Intake Kit
w/ Intake Tube
Air Filter Color : Red
Air Filter Height : 6 in (152 mm)
Air Filter Large End Diameter : 7.5 in (191 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-26
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 6
Couplers Included : 2
Estimated Horsepower Gain : 5.86 HP @ 4202 RPM
Horse Power Increase : 6 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RF-1048
RPM : 4202
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 10 lb (4.5 kg)
//d5otzd52uv6zz.cloudfront.net/c38d6655-a0da-4c68-9248-359fd629734b-50.jpg 57-2537 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-2537)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 6 in (152 mm)
Air Filter Large End Diameter : 7.5 in (191 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-26
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 6
Couplers Included : 2
Estimated Horsepower Gain : 7.34 HP @ 4890 RPM
Horse Power Increase : 7 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RF-1048
RPM : 4890
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 9.1 lb (4.1 kg)
//d5otzd52uv6zz.cloudfront.net/002616df-95e4-4eda-a5c0-5c06b2de2957-50.jpg 57-2538 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-2538)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 8 in (203 mm)
Air Filter Large End Diameter : 7.5 in (191 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-28
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 6
Couplers Included : 2
Estimated Horsepower Gain : 10.15 HP @ 4618 RPM
Horse Power Increase : 10 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RF-1020
RPM : 4618
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 11.6 lb (5.3 kg)
//d5otzd52uv6zz.cloudfront.net/f652b853-20c2-4f31-8765-4bfdedc146f5-50.jpg 57-2539 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-2539)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 6 in (152 mm)
Air Filter Large End Diameter : 7.5 in (191 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-26
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 7
Couplers Included : 2
Estimated Horsepower Gain : 8.64 HP @ 4486 RPM
Horse Power Increase : 9 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RF-1048
RPM : 4486
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 11.2 lb (5.1 kg)
//d5otzd52uv6zz.cloudfront.net/a2d27ab6-61d3-467f-a6ae-e51dd63738b7-50.jpg 57-2540 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-2540)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 6.5 in (165 mm)
Air Filter Large End Diameter : 6.5 in (165 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-26
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 6
Couplers Included : 2
Estimated Horsepower Gain : 6.62 HP @ 5000 RPM
Horse Power Increase : 7 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RF-1037
RPM : 5000
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 6.9 lb (3.1 kg)
//d5otzd52uv6zz.cloudfront.net/c06fde62-cd2c-4eaf-abd0-26311659e657-50.jpg 57-2541 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-2541)
FIPK Intake Kit
w/Heat Shield
Air Filter Color : Red
Air Filter Height : 9 in (229 mm)
Air Filter Large End Diameter : 7.5 in (191 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-37
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 8
Couplers Included : 3
Estimated Horsepower Gain : 13.12 HP @ 4562 RPM
Horse Power Increase : 13 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RC-5046
RPM : 4562
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 13.3 lb (6.1 kg)
//d5otzd52uv6zz.cloudfront.net/96b6e152-a2d5-4d69-9ef3-4eb7da8e1ea3-50.jpg 57-2542 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-2542)
FIPK Intake Kit
w/ Intake Tube
Air Filter Color : Red
Air Filter Height : 9 in (229 mm)
Air Filter Large End Diameter : 6 in (152 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-28
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 6
Couplers Included : 2
Estimated Horsepower Gain : 9.33 HP @ 3696 RPM
Horse Power Increase : 9 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RC-3690
RPM : 3696
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 12.7 lb (5.8 kg)
//d5otzd52uv6zz.cloudfront.net/0223c359-44da-4675-a486-098a6a41640d-50.jpg 57-2543 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-2543)
FIPK Intake Kit
w/ Intake Tube
Air Filter Color : Red
Air Filter Height : 7.5 in (191 mm)
Air Filter Large End Diameter : 7.5 in (191 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-26
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 8
Couplers Included : 3
Estimated Horsepower Gain : 10.22 HP @ 4201 RPM
Horse Power Increase : 10 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RF-1041
RPM : 4201
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 11.5 lb (5.2 kg)
//d5otzd52uv6zz.cloudfront.net/060bf911-cd0f-410d-91a6-5bd5e6510c37-50.jpg 57-2544 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-2544)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 7.5 in (191 mm)
Air Filter Large End Diameter : 7.5 in (191 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-26
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 6
Couplers Included : 2
Estimated Horsepower Gain : 16.85 HP @ 5000 RPM
Horse Power Increase : 17 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RF-1041
RPM : 5000
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 9.6 lb (4.4 kg)
//d5otzd52uv6zz.cloudfront.net/18e8f5e3-600e-4e8c-a299-4834dab1d959-50.jpg 57-2545 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-2545)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 9 in (229 mm)
Air Filter Large End Diameter : 7.5 in (191 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-28
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 1
Couplers Included : None
Estimated Horsepower Gain : 30.28 HP @ 5900 RPM
Horse Power Increase : 30 HP
Mounting Hardware Included : Yes
Replacement Filter : RC-5046
RPM : 5900
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 8.5 lb (3.9 kg)
//d5otzd52uv6zz.cloudfront.net/014a818c-b578-45a3-91c0-f29bd49b9169-50.jpg 57-2546-1 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-2546-1)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 7.875 in (200 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-34
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 7
Couplers Included : 3
Estimated Horsepower Gain : 15.53 HP @ 3426 RPM
Horse Power Increase : 16 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RC-5178
RPM : 3426
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 12.1 lb (5.5 kg)
//d5otzd52uv6zz.cloudfront.net/7de1b20d-f496-4c23-9e0b-e356668b410a-50.jpg 57-2547 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-2547)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 6 in (152 mm)
Air Filter Large End Diameter : 5.875 in (149 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-31
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 5
Couplers Included : 3
Estimated Horsepower Gain : 5.51 HP @ 6500 RPM
Horse Power Increase : 6 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RP-5101
RPM : 6500
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 6.9 lb (3.1 kg)
//d5otzd52uv6zz.cloudfront.net/7fbfec75-1c9a-4b05-b275-bc44a6f95909-50.jpg 57-2548 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-2548)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 9 in (229 mm)
Air Filter Large End Diameter : 7.5 in (191 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-26
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 5
Couplers Included : 2
Estimated Horsepower Gain : 15.29 HP @ 5000 RPM
Horse Power Increase : 15 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RC-5046
RPM : 5000
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 10.5 lb (4.8 kg)
//d5otzd52uv6zz.cloudfront.net/134fbff7-7efc-4ed6-b4bf-a27034c637db-50.jpg 57-2549 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-2549)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 9 in (229 mm)
Air Filter Large End Diameter : 7.5 in (191 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-28
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 5
Couplers Included : 2
Estimated Horsepower Gain : 15.63 HP @ 5162 RPM
Horse Power Increase : 16 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RC-5046
RPM : 5162
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 10.5 lb (4.8 kg)
//d5otzd52uv6zz.cloudfront.net/3a392e84-9abf-420e-bacd-d2204c82adde-50.jpg 57-2550 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-2550)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 9 in (229 mm)
Air Filter Large End Diameter : 7.5 in (191 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-28
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 6
Couplers Included : 2
Estimated Horsepower Gain : 7.58 HP @ 4891 RPM
Horse Power Increase : 8 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RC-5046
RPM : 4891
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 11.1 lb (5.1 kg)
//d5otzd52uv6zz.cloudfront.net/c6260129-066b-40d5-a339-79cc45bb0595-50.jpg 57-2551 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-2551)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 8 in (203 mm)
Air Filter Large End Diameter : 7.5 in (191 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-28
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 6
Couplers Included : 2
Estimated Horsepower Gain : 15.48 HP @ 5049 RPM
Horse Power Increase : 15 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RF-1020
RPM : 5049
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 10.3 lb (4.7 kg)
//d5otzd52uv6zz.cloudfront.net/80a6cd7f-2880-4988-b53f-ea56f569ed8d-50.jpg 57-2552 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-2552)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 6.5 in (165 mm)
Air Filter Large End Diameter : 6.5 in (165 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-28
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 5
Couplers Included : 2
Estimated Horsepower Gain : 6.77 HP @ 4874 RPM
Horse Power Increase : 7 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RF-1037
RPM : 4874
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 8.7 lb (3.9 kg)
//d5otzd52uv6zz.cloudfront.net/4e7a5443-39d5-43ef-bbea-0fba1393735b-50.jpg 57-2553 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-2553)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 7.5 in (191 mm)
Air Filter Large End Diameter : 7.5 in (191 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-28
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 6
Couplers Included : 2
Estimated Horsepower Gain : 13.07 HP @ 4979 RPM
Horse Power Increase : 13 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RF-1041
RPM : 4979
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 9.2 lb (4.2 kg)
//d5otzd52uv6zz.cloudfront.net/c8e08e29-3d02-483b-821b-154db6e3134b-50.jpg 57-2554 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-2554)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 6.5 in (165 mm)
Air Filter Large End Diameter : 6.5 in (165 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-28
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 5
Couplers Included : 2
Estimated Horsepower Gain : 9.38 HP @ 4848 RPM
Horse Power Increase : 9 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RF-1037
RPM : 4848
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 8.5 lb (3.9 kg)
//d5otzd52uv6zz.cloudfront.net/52bdcc5e-cf4b-4b34-acf4-725c306819bb-50.jpg 57-2555 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-2555)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 7.5 in (191 mm)
Air Filter Large End Diameter : 7.5 in (191 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-28
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 5
Couplers Included : 2
Estimated Horsepower Gain : 12.56 HP @ 5100 RPM
Horse Power Increase : 13 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RF-1041
RPM : 5100
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 9.8 lb (4.4 kg)
//d5otzd52uv6zz.cloudfront.net/0b206f8a-c75d-4c9b-8309-6cb99f36f3fb-50.jpg 57-2556 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-2556)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 8 in (203 mm)
Air Filter Large End Diameter : 7.5 in (191 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-37
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 7
Couplers Included : 3
Estimated Horsepower Gain : 15.46 HP @ 3829 RPM
Horse Power Increase : 15 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RF-1020
RPM : 3829
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 14 lb (6.4 kg)
//d5otzd52uv6zz.cloudfront.net/28bc5bd3-2862-42c6-a314-a0bda922521a-50.jpg 57-2557 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-2557)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 8 in (203 mm)
Air Filter Large End Diameter : 7.5 in (191 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-31
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 5
Couplers Included : 2
Estimated Horsepower Gain : 7.84 HP @ 4828 RPM
Horse Power Increase : 8 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RF-1020
RPM : 4828
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 12.3 lb (5.6 kg)
//d5otzd52uv6zz.cloudfront.net/491e72c6-c373-454a-b036-7f2990f38dc1-50.jpg 57-2558 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-2558)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 9 in (229 mm)
Air Filter Large End Diameter : 7.5 in (191 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-28
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 5
Couplers Included : 2
Estimated Horsepower Gain : 15.05 HP @ 4649 RPM
Horse Power Increase : 15 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RC-5046
RPM : 4649
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 12.3 lb (5.6 kg)
//d5otzd52uv6zz.cloudfront.net/1e8125ac-e176-430f-bfb0-96bf926666d8-50.jpg 57-2559 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-2559)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 5.563 in (141 mm)
Air Filter Large End Diameter : 6 in (152 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-31
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 3
Couplers Included : 1
Estimated Horsepower Gain : 11.85 HP @ 5797 RPM
Horse Power Increase : 12 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RX-4990
RPM : 5797
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 7.1 lb (3.2 kg)
//d5otzd52uv6zz.cloudfront.net/2940a5f2-2448-4372-b5c6-9d2ec75840ef-50.jpg 57-2560 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-2560)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 6.5 in (165 mm)
Air Filter Large End Diameter : 6 in (152 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-37
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 3
Couplers Included : 1
Estimated Horsepower Gain : 10.03 HP @ 4921 RPM
Horse Power Increase : 10 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RX-4860
RPM : 4921
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 8.7 lb (3.9 kg)
//d5otzd52uv6zz.cloudfront.net/ece34334-3ad6-429d-a58b-574606709bef-50.jpg 57-2561 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-2561)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 5.563 in (141 mm)
Air Filter Large End Diameter : 6 in (152 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-48
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 3
Couplers Included : 1
Estimated Horsepower Gain : 13.46 HP @ 5129 RPM
Horse Power Increase : 13 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RU-4990
RPM : 5129
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 8.3 lb (3.8 kg)
//d5otzd52uv6zz.cloudfront.net/84f19974-915b-4f21-a62d-3f9d48bd730a-50.jpg 57-2562 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-2562)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 6.5 in (165 mm)
Air Filter Large End Diameter : 5.5 in (140 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-31
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 4
Couplers Included : 1
Estimated Horsepower Gain : 15.75 HP @ 6000 RPM
Horse Power Increase : 16 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RC-4630
RPM : 6000
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 8.4 lb (3.8 kg)
//d5otzd52uv6zz.cloudfront.net/9a73c916-192f-4ae4-a458-2fad78365eb9-50.jpg 57-2563 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-2563)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 7.5 in (191 mm)
Air Filter Large End Diameter : 7.5 in (191 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-31
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 5
Couplers Included : 2
Estimated Horsepower Gain : 17.3 HP @ 5675 RPM
Horse Power Increase : 17 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RF-1041
RPM : 5675
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 9.2 lb (4.2 kg)
//d5otzd52uv6zz.cloudfront.net/5262ff83-eb35-4f40-9d24-80dc144cb993-50.jpg 57-2564 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-2564)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 6 in (152 mm)
Air Filter Large End Diameter : 7.5 in (191 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-31
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 6
Couplers Included : 2
Estimated Horsepower Gain : 10.4 HP @ 4921 RPM
Horse Power Increase : 10 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RF-1048
RPM : 4921
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 11.2 lb (5.1 kg)
//d5otzd52uv6zz.cloudfront.net/caa7581c-c250-4080-82e8-2807e201ad57-50.jpg 57-2565 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-2565)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 6 in (152 mm)
Air Filter Large End Diameter : 7.5 in (191 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-34
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 6
Couplers Included : 2
Estimated Horsepower Gain : 15.31 HP @ 6000 RPM
Horse Power Increase : 15 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RF-1048
RPM : 6000
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 10.3 lb (4.7 kg)
//d5otzd52uv6zz.cloudfront.net/68988bf8-977e-4255-b5fd-c8f31521fa4f-50.jpg 57-2566 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-2566)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 6 in (152 mm)
Air Filter Large End Diameter : 7.5 in (191 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-37
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 5
Couplers Included : 2
Estimated Horsepower Gain : 7.54 HP @ 4996 RPM
Horse Power Increase : 8 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RF-1048
RPM : 4996
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 8.8 lb (4 kg)
//d5otzd52uv6zz.cloudfront.net/ea984613-05ed-4ffa-badc-0e633a29db7d-50.jpg 57-2567 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-2567)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 9 in (229 mm)
Air Filter Large End Diameter : 7.5 in (191 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-34
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 6
Couplers Included : 2
Estimated Horsepower Gain : 16.22 HP @ 4450 RPM
Horse Power Increase : 16 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Oversize Shipping : OS1
Replacement Filter : RC-5046
RPM : 4450
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 15.3 lb (6.9 kg)
//d5otzd52uv6zz.cloudfront.net/18899227-6e7d-4e4f-b730-aa95fa1de252-50.jpg 57-2568 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-2568)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 8 in (203 mm)
Air Filter Large End Diameter : 7.5 in (191 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-34
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 7
Couplers Included : 3
Estimated Horsepower Gain : 13.63 HP @ 3872 RPM
Horse Power Increase : 14 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RF-1020
RPM : 3872
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 12.4 lb (5.6 kg)
//d5otzd52uv6zz.cloudfront.net/740f01ee-e676-4e9d-b3f9-b578df339be1-50.jpg 57-2569 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-2569)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 7.5 in (191 mm)
Air Filter Large End Diameter : 7.5 in (191 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-34
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 6
Couplers Included : 2
Estimated Horsepower Gain : 8.48 HP @ 4775 RPM
Horse Power Increase : 8 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RF-1041
RPM : 4775
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 11.8 lb (5.3 kg)
//d5otzd52uv6zz.cloudfront.net/90ea79f4-6e60-41fe-a2bf-e52cbfd4a697-50.jpg 57-2570 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-2570)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 9 in (229 mm)
Air Filter Large End Diameter : 7.5 in (191 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-34
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 6
Couplers Included : 2
Estimated Horsepower Gain : 21.49 HP @ 4387 RPM
Horse Power Increase : 21 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Oversize Shipping : OS1
Replacement Filter : RC-5046
RPM : 4387
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 14.4 lb (6.5 kg)
//d5otzd52uv6zz.cloudfront.net/f607b64e-f1f2-4c35-afca-ece5f93f4124-50.jpg 57-2571 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-2571)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 6 in (152 mm)
Air Filter Large End Diameter : 7.5 in (191 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-37
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 5
Couplers Included : 2
Estimated Horsepower Gain : 56.96 HP @ 5900 RPM
Horse Power Increase : 57 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RF-1048
RPM : 5900
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 9 lb (4.1 kg)
//d5otzd52uv6zz.cloudfront.net/3f620e9f-4be4-4ed1-bd3c-a2a7edd7dda8-50.jpg 57-2572 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-2572)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 9 in (229 mm)
Air Filter Large End Diameter : 7.5 in (191 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-48
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 7
Couplers Included : 2
Estimated Horsepower Gain : 7.44 HP @ 4106 RPM
Horse Power Increase : 7 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RC-5046
RPM : 4106
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 11.5 lb (5.2 kg)
//d5otzd52uv6zz.cloudfront.net/f2aeb929-7ec8-4da6-81a7-99a85af56380-50.jpg 57-2573 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-2573)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 6 in (152 mm)
Air Filter Large End Diameter : 7.5 in (191 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-37
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 5
Couplers Included : 2
Estimated Horsepower Gain : 11.0 HP @ 4500 RPM
Horse Power Increase : 11 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RF-1048
RPM : 4500
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 10.8 lb (4.9 kg)
//d5otzd52uv6zz.cloudfront.net/732cdcba-d6f4-4fb5-9259-d1145470a35b-50.jpg 57-2574 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-2574)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 7.5 in (191 mm)
Air Filter Large End Diameter : 7.5 in (191 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-37
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 6
Couplers Included : 2
Estimated Horsepower Gain : 9.88 HP @ 4200 RPM
Horse Power Increase : 10 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RF-1041
RPM : 4200
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 11.8 lb (5.4 kg)
//d5otzd52uv6zz.cloudfront.net/c518871c-1604-461d-924c-e79e2d99a1c6-50.jpg 57-2575 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-2575)
FIPK Intake Kit
w/ Intake Tube
Air Filter Color : Red
Air Filter Height : 6 in (152 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-48
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 6
Couplers Included : 2
Estimated Horsepower Gain : 11.04 HP @ 4600 RPM
Horse Power Increase : 11 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RC-5173
RPM : 4600
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 11.3 lb (5.1 kg)
//d5otzd52uv6zz.cloudfront.net/e363c489-eee1-447c-a2fd-6d01bcb5a092-50.jpg 57-2576 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-2576)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 7.938 in (202 mm)
Air Filter Large End Diameter : 9 in (229 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-36
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 4
Couplers Included : 1
Estimated Horsepower Gain : 16.4 HP @ 2600 RPM
Horse Power Increase : 16 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RU-5172
RPM : 2600
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 9.9 lb (4.5 kg)
//d5otzd52uv6zz.cloudfront.net/9b566018-0798-43a8-a256-ff3299c5f98b-50.jpg 57-2577 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-2577)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 6 in (152 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-38
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 5
Couplers Included : 2
Estimated Horsepower Gain : 7.4 HP @ 4700 RPM
Horse Power Increase : 7 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RC-4381
RPM : 4700
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 10.1 lb (4.6 kg)
//d5otzd52uv6zz.cloudfront.net/a6442731-22d0-43d2-95c3-242e3bda6433-50.jpg 57-2578 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-2578)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 1.25 in (32 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Not Flanged
CARB EO Number : D-269-48
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 4
Couplers Included : 2
Estimated Horsepower Gain : 10.09 HP @ 5379 RPM
Horse Power Increase : 10 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : 33-2431
RPM : 5379
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 5.8 lb (2.6 kg)
//d5otzd52uv6zz.cloudfront.net/007755c5-cc2b-49b0-9783-6fc4f5bc71e3-50.jpg 57-2579 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-2579)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 8 in (203 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-48
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 5
Couplers Included : 2
Estimated Horsepower Gain : 30.49 HP @ 5200 RPM
Horse Power Increase : 30 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RF-1044
RPM : 5200
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 11.2 lb (5.1 kg)
//d5otzd52uv6zz.cloudfront.net/179c0a78-63fc-4583-bf12-c0ef5a595466-50.jpg 57-2580 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-2580)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 6 in (152 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-48
Clamp Material : Steel
Clamp Style : Regular
Clamps Included : 5
Couplers Included : 2
Estimated Horsepower Gain : 16.14 HP @ 4650 RPM
Horse Power Increase : 16 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RC-5173
RPM : 4650
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 10.7 lb (4.8 kg)
//d5otzd52uv6zz.cloudfront.net/336805a5-0e40-4ef5-862f-43de9d4c361f-50.jpg 57-2581 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-2581)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 6 in (152 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-48
Clamp Material : Steel
Clamp Style : Regular
Clamps Included : 5
Couplers Included : 2
Estimated Horsepower Gain : 12.05 HP @ 5304 RPM
Horse Power Increase : 12 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RC-5173
RPM : 5304
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 10.6 lb (4.8 kg)
//d5otzd52uv6zz.cloudfront.net/96b9b0c3-34bd-4221-a0d3-0331dd878136-50.jpg 57-2583 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-2583)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 6 in (152 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-48
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 5
Couplers Included : 3
Estimated Horsepower Gain : 11.05 HP @ 4318 RPM
Horse Power Increase : 11 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RC-5173
RPM : 4318
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 12 lb (5.4 kg)
//d5otzd52uv6zz.cloudfront.net/5baab5a7-59cf-4f66-b35a-c07b3d75cf14-50.jpg 57-2584 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-2584)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 6 in (152 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-48
Clamp Material : Steel
Clamp Style : Regular
Clamps Included : 5
Couplers Included : 2
Estimated Horsepower Gain : 27.18 HP @ 5347 RPM
Horse Power Increase : 27 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RC-5173
RPM : 5347
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 12.3 lb (5.6 kg)
//d5otzd52uv6zz.cloudfront.net/21c1a3d6-2adc-414c-a0cd-60081052ba19-50.jpg 57-2585 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-2585)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 5.438 in (138 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-57
Clamp Material : Steel
Clamp Style : Regular
Clamps Included : 3
Couplers Included : 1
Estimated Horsepower Gain : 10.05 HP @ 5185 RPM
Horse Power Increase : 10 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RC-1637
RPM : 5185
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 8.3 lb (3.8 kg)
//d5otzd52uv6zz.cloudfront.net/107528b0-15f0-4c50-8af1-47d9908857c6-50.jpg 57-2587 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-2587)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 5.5 in (140 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-57
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 3
Couplers Included : 1
Estimated Horsepower Gain : 7.21 HP @ 5210 RPM
Horse Power Increase : 7 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RU-4960
RPM : 5210
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 7.4 lb (3.4 kg)
//d5otzd52uv6zz.cloudfront.net/group-9e77fa46-2f6c-4db0-9321-24541c4b98da-50.jpg 57-2588 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-2588)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Not Flanged
CARB EO Number : D-269-57
Clamp Material : Carbon Steel
Clamp Style : Regular
Clamps Included : 4
Couplers Included : 1
Estimated Horsepower Gain : 4.78 HP @ 5247 RPM
Horse Power Increase : 5 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : 33-5000
RPM : 5247
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 6 lb (2.7 kg)
//d5otzd52uv6zz.cloudfront.net/group-9e77fa46-2f6c-4db0-9321-24541c4b98da-50.jpg 57-2589 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-2589)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-57
Clamp Material : Stainless Steel
Clamp Style : Worm Gear
Clamps Included : 5
Couplers Included : 2
Estimated Horsepower Gain : 15.72 HP @ 4224 RPM
Horse Power Increase : 16 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RC-2960
RPM : 4224
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 12.9 lb (5.8 kg)
//d5otzd52uv6zz.cloudfront.net/group-9e77fa46-2f6c-4db0-9321-24541c4b98da-50.jpg 57-2590 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-2590)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Not Flanged
CARB EO Number : D-269-57
Clamp Material : Carbon Steel
Clamp Style : Regular
Clamps Included : 4
Couplers Included : 2
Estimated Horsepower Gain : 9.12 HP @ 5342 RPM
Horse Power Increase : 9 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : 33-5029
RPM : 5342
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 12.8 lb (5.8 kg)
//d5otzd52uv6zz.cloudfront.net/group-9e77fa46-2f6c-4db0-9321-24541c4b98da-50.jpg 57-2591 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-2591)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 6 in (152 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-46
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 5
Couplers Included : 1
Estimated Horsepower Gain : 12.74 HP @ 4555 RPM
Horse Power Increase : 13 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RC-5173
RPM : 4555
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 11.2 lb (5.1 kg)
//d5otzd52uv6zz.cloudfront.net/group-9e77fa46-2f6c-4db0-9321-24541c4b98da-50.jpg 57-2592 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-2592)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-57
Clamp Material : Stainless Steel
Clamp Style : Worm Gear
Clamps Included : 7
Couplers Included : 2
Estimated Horsepower Gain : 23.01 HP @ 3505 RPM
Horse Power Increase : 23 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RC-5173
RPM : 3505
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 10.1 lb (4.6 kg)
//d5otzd52uv6zz.cloudfront.net/group-9e77fa46-2f6c-4db0-9321-24541c4b98da-50.jpg 57-2593 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-2593)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-57
Clamp Material : Stainless Steel
Clamp Style : Worm Gear
Clamps Included : 7
Couplers Included : 3
Estimated Horsepower Gain : 19.37 HP @ 4500 RPM
Horse Power Increase : 19 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RF-1042
RPM : 4500
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 10.9 lb (4.9 kg)
//d5otzd52uv6zz.cloudfront.net/group-9e77fa46-2f6c-4db0-9321-24541c4b98da-50.jpg 57-2595 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-2595)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-57
Clamp Material : Stainless Steel
Clamp Style : Worm Gear
Clamps Included : 7
Couplers Included : 3
Estimated Horsepower Gain : 6.94 HP @ 4100 RPM
Horse Power Increase : 7 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RC-5173
RPM : 4100
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 11 lb (5 kg)
//d5otzd52uv6zz.cloudfront.net/52a3b9a2-cd43-435e-852d-5cdc9b3bd8b8-50.jpg 57-3000 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-3000)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 7.5 in (191 mm)
Air Filter Large End Diameter : 9 in (229 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-34
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 1
Couplers Included : None
Estimated Horsepower Gain : 15.42 HP @ 2911 RPM
Horse Power Increase : 15 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RC-5179
RPM : 2911
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 11.8 lb (5.4 kg)
//d5otzd52uv6zz.cloudfront.net/d06bb8a8-69fc-474c-997d-3982ab1bd471-50.jpg 57-3009 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-3009)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 6 in (152 mm)
Air Filter Large End Diameter : 5.75 in (146 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-11
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 4
Couplers Included : 1
Estimated Horsepower Gain : 7.1 HP @ 4571 RPM
Horse Power Increase : 7 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RF-1023
RPM : 4571
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 7.8 lb (3.6 kg)
//d5otzd52uv6zz.cloudfront.net/318cc545-172e-49c7-ae22-5556b6ec00ba-50.jpg 57-3010-1 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-3010-1)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 7 in (178 mm)
Air Filter Large End Diameter : 6 in (152 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-11
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 4
Couplers Included : None
Estimated Horsepower Gain : 18.3 HP @ 5331 RPM
Horse Power Increase : 18 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RF-1015
RPM : 5331
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 5.8 lb (2.6 kg)
//d5otzd52uv6zz.cloudfront.net/d38b0e50-5d14-454e-aec5-81a85b4e1d5c-50.jpg 57-3011 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-3011)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 8 in (203 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-11
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 5
Couplers Included : None
Estimated Horsepower Gain : 18.83 HP @ 4760 RPM
Horse Power Increase : 19 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RF-1021
RPM : 4760
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 9.4 lb (4.3 kg)
//d5otzd52uv6zz.cloudfront.net/9f98b2b4-bd6c-4872-a35c-721cf28186cc-50.jpg 57-3012 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-3012)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 6.5 in (165 mm)
Air Filter Large End Diameter : 5.375 in (137 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-11
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 1
Couplers Included : None
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RF-1018
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen I
Weight : 3.1 lb (1.4 kg)
//d5otzd52uv6zz.cloudfront.net/bc28f71f-5fb9-42a5-b70a-80320e0239b0-50.jpg 57-3013-2 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-3013-2)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 10 in (254 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-28
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 5
Couplers Included : 2
Estimated Horsepower Gain : 9.48 HP @ 4918 RPM
Horse Power Increase : 9 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RF-1024
RPM : 4918
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 17.6 lb (8 kg)
//d5otzd52uv6zz.cloudfront.net/506dac6e-2be4-45a0-a4fa-2148c66268c8-50.jpg 57-3014 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-3014)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 4 in (102 mm)
Air Filter Inside Diameter : 12 in (305 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Not Flanged
CARB EO Number : D-269-9
Clamp Material : Stainless Steel
Clamp Style : Mini
Clamps Included : 1
Couplers Included : None
Estimated Horsepower Gain : 17.55 HP @ 3811 RPM
Horse Power Increase : 18 HP
Mounting Hardware Included : Yes
Replacement Filter : E-3750
RPM : 3811
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen I
Weight : 6.5 lb (3 kg)
//d5otzd52uv6zz.cloudfront.net/d266a0f5-83c8-4f8e-854b-ec6c20f77994-50.jpg 57-3016-1 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-3016-1)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 7.5 in (191 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-15
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 6
Couplers Included : 2
Estimated Horsepower Gain : 21.46 HP @ 4078 RPM
Horse Power Increase : 21 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RF-1040
RPM : 4078
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 11.9 lb (5.4 kg)
//d5otzd52uv6zz.cloudfront.net/77e551cf-c332-499c-be89-d023480ebf8c-50.jpg 57-3017-2 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-3017-2)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 6 in (152 mm)
Air Filter Large End Diameter : 5.75 in (146 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-31
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 8
Couplers Included : 3
Estimated Horsepower Gain : 7.42 HP @ 4671 RPM
Horse Power Increase : 7 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RF-1035
RPM : 4671
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 12.4 lb (5.6 kg)
//d5otzd52uv6zz.cloudfront.net/f84f4c49-25b0-48f1-9e95-8a4b94ffd303-50.jpg 57-3020 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-3020)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 6 in (152 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-15
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 6
Couplers Included : 4
Estimated Horsepower Gain : 18.29 HP @ 5500 RPM
Horse Power Increase : 18 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RF-1038
RPM : 5500
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 8.9 lb (4.1 kg)
//d5otzd52uv6zz.cloudfront.net/3f0508ba-1577-47a0-925f-21c465135ad0-50.jpg 57-3021-1 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-3021-1)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 7.5 in (191 mm)
Air Filter Large End Diameter : 7.5 in (191 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-28
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 5
Couplers Included : 2
Estimated Horsepower Gain : 9.12 HP @ 5352 RPM
Horse Power Increase : 9 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RF-1041
RPM : 5352
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 11.4 lb (5.2 kg)
//d5otzd52uv6zz.cloudfront.net/7a00b630-8442-4db7-b517-155397602d32-50.jpg 57-3022-2 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-3022-2)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 5.75 in (146 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Oval
CARB EO Number : D-269-20
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 4
Couplers Included : 2
Estimated Horsepower Gain : 14.73 HP @ 5300 RPM
Horse Power Increase : 15 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RF-1050
RPM : 5300
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 12.4 lb (5.6 kg)
//d5otzd52uv6zz.cloudfront.net/dd97a858-cafc-4655-8077-07ce17ff6965-50.jpg 57-3023-1 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-3023-1)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 6.5 in (165 mm)
Air Filter Large End Diameter : 7.5 in (191 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-37
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 5
Couplers Included : 2
Estimated Horsepower Gain : 14.26 HP @ 5018 RPM
Horse Power Increase : 14 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RF-1042
RPM : 5018
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 11.7 lb (5.3 kg)
//d5otzd52uv6zz.cloudfront.net/484364de-ee7a-4180-8f10-2579691db5c4-50.jpg 57-3024 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-3024)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 6 in (152 mm)
Air Filter Large End Diameter : 5 in (127 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-17
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 4
Couplers Included : 2
Estimated Horsepower Gain : 7.5 HP @ 5224 RPM
Horse Power Increase : 8 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RC-4650
RPM : 5224
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 10.4 lb (4.7 kg)
//d5otzd52uv6zz.cloudfront.net/e0501654-921c-45ca-a49a-58c837d4217b-50.jpg 57-3025-1 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-3025-1)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 6 in (152 mm)
Air Filter Large End Diameter : 5 in (127 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-25
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 4
Couplers Included : 2
Estimated Horsepower Gain : 6.73 HP @ 4700 RPM
Horse Power Increase : 7 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RC-4650
RPM : 4700
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 10.4 lb (4.7 kg)
//d5otzd52uv6zz.cloudfront.net/5bcbd05a-aac4-4a6c-8acf-dcb0c7fa92ad-50.jpg 57-3026 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-3026)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 7 in (178 mm)
Air Filter Large End Diameter : 6.5 in (165 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-17
Clamp Material : Stainless Steel
Clamp Style : Mini
Clamps Included : 3
Couplers Included : 1
Estimated Horsepower Gain : 6.72 HP @ 4107 RPM
Horse Power Increase : 7 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RF-1032
RPM : 4107
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 14.4 lb (6.5 kg)
//d5otzd52uv6zz.cloudfront.net/7da130a8-d387-4d5d-b13e-34c9119eae1a-50.jpg 57-3027 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-3027)
FIPK Intake Kit
Generation II
Air Filter Color : Red
Air Filter Height : 7 in (178 mm)
Air Filter Large End Diameter : 6.5 in (165 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-17
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 4
Couplers Included : 1
Estimated Horsepower Gain : 7.41 HP @ 3571 RPM
Horse Power Increase : 7 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RF-1032
RPM : 3571
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 10.8 lb (4.9 kg)
//d5otzd52uv6zz.cloudfront.net/15e6fd44-c34a-4604-b0ef-014a09f33948-50.jpg 57-3028 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-3028)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 2.75 in (70 mm)
Air Filter Inside Diameter : 9.25 in (235 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Not Flanged
CARB EO Number : D-269-17
Clamp Material : No Clamps Required
Clamp Style : No Clamps Required
Clamps Included : No Clamps Included
Couplers Included : None
Mounting Hardware Included : Yes
Replacement Filter : E-1240
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen I
Weight : 3.4 lb (1.5 kg)
//d5otzd52uv6zz.cloudfront.net/589b1248-389f-41d9-be8b-fc73ae157b8b-50.jpg 57-3029 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-3029)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 3 in (76 mm)
Air Filter Inside Diameter : 9.25 in (235 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Not Flanged
CARB EO Number : D-269-17
Clamp Material : No Clamps Required
Clamp Style : No Clamps Required
Clamps Included : No Clamps Included
Couplers Included : None
Estimated Horsepower Gain : 4.66 HP @ 3971 RPM
Horse Power Increase : 5 HP
Mounting Hardware Included : Yes
Replacement Filter : E-1230
RPM : 3971
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen I
Weight : 5 lb (2.3 kg)
//d5otzd52uv6zz.cloudfront.net/fcec06af-53ef-4244-aa82-a8d158679188-50.jpg 57-3030-1 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-3030-1)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 7.5 in (191 mm)
Air Filter Large End Diameter : 7.5 in (191 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-37
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 5
Couplers Included : 2
Estimated Horsepower Gain : 17.31 HP @ 4559 RPM
Horse Power Increase : 17 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RF-1041
RPM : 4559
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 11.4 lb (5.2 kg)
//d5otzd52uv6zz.cloudfront.net/0e4e0590-ce3e-4b1b-9edc-eb0e2092d5f9-50.jpg 57-3031-1 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-3031-1)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 7.5 in (191 mm)
Air Filter Large End Diameter : 7.5 in (191 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-37
Clamp Material : Stainless Steel
Clamp Style : MIDI
Clamps Included : 5
Couplers Included : 2
Estimated Horsepower Gain : 20.34 HP @ 4894 RPM
Horse Power Increase : 20 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RF-1041
RPM : 4894
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 11.4 lb (5.2 kg)
//d5otzd52uv6zz.cloudfront.net/df4de6ba-6cad-4a7c-a9fd-341ec21b9853-50.jpg 57-3032 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-3032)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 7.5 in (191 mm)
Air Filter Large End Diameter : 7.5 in (191 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-34
Clamp Material : Stainless Steel
Clamp Style : MIDI
Clamps Included : 5
Couplers Included : 2
Estimated Horsepower Gain : 12.98 HP @ 4231 RPM
Horse Power Increase : 13 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RF-1041
RPM : 4231
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 10.4 lb (4.7 kg)
//d5otzd52uv6zz.cloudfront.net/c14a4555-496c-419b-961f-8ee83965ac09-50.jpg 57-3033 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-3033)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 7.5 in (191 mm)
Air Filter Large End Diameter : 7.5 in (191 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-28
Clamp Material : Stainless Steel
Clamp Style : MIDI
Clamps Included : 5
Couplers Included : 2
Estimated Horsepower Gain : 10.22 HP @ 5244 RPM
Horse Power Increase : 10 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RF-1041
RPM : 5244
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 11.4 lb (5.2 kg)
//d5otzd52uv6zz.cloudfront.net/0c65c040-5729-495c-a23d-747091e07b38-50.jpg 57-3034 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-3034)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 7.875 in (200 mm)
Air Filter Large End Diameter : 7.375 in (187 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-28
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 4
Couplers Included : 1
Estimated Horsepower Gain : 16.33 HP @ 2750 RPM
Horse Power Increase : 16 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RC-4900
RPM : 2750
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 12.9 lb (5.9 kg)
//d5otzd52uv6zz.cloudfront.net/56e5b517-b849-4e54-9fe0-297ff3cb3c85-50.jpg 57-3035 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-3035)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 6 in (152 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-28
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 6
Couplers Included : 4
Estimated Horsepower Gain : 11.35 HP @ 4700 RPM
Horse Power Increase : 11 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RP-5070
RPM : 4700
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 8.8 lb (4 kg)
//d5otzd52uv6zz.cloudfront.net/cd619321-1a12-4fd3-b68f-66d0fa26c289-50.jpg 57-3036 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-3036)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 6.5 in (165 mm)
Air Filter Large End Diameter : 5.5 in (140 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-31
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 4
Couplers Included : 1
Estimated Horsepower Gain : 9.28 HP @ 5623 RPM
Horse Power Increase : 9 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RC-4630
RPM : 5623
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 9 lb (4.1 kg)
//d5otzd52uv6zz.cloudfront.net/ba7230ae-26a5-4434-85b4-b8014cc92cd3-50.jpg 57-3037 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-3037)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 7 in (178 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-38
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 6
Couplers Included : 3
Estimated Horsepower Gain : 11.42 HP @ 4524 RPM
Horse Power Increase : 11 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RP-5103
RPM : 4524
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 10.9 lb (4.9 kg)
//d5otzd52uv6zz.cloudfront.net/705385e8-ebc6-4c85-8379-721df045bfff-50.jpg 57-3038 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-3038)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 7.5 in (191 mm)
Air Filter Large End Diameter : 7.5 in (191 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-34
Clamp Material : Stainless Steel
Clamp Style : MIDI
Clamps Included : 5
Couplers Included : 2
Estimated Horsepower Gain : 8.21 HP @ 4544 RPM
Horse Power Increase : 8 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RF-1041
RPM : 4544
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 13.3 lb (6 kg)
//d5otzd52uv6zz.cloudfront.net/935815ea-adc4-4867-976c-ae5f5caac264-50.jpg 57-3039 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-3039)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 7.5 in (191 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-31
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 9
Couplers Included : 3
Estimated Horsepower Gain : 6.02 HP @ 4476 RPM
Horse Power Increase : 6 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RF-1040
RPM : 4476
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 14.3 lb (6.5 kg)
//d5otzd52uv6zz.cloudfront.net/0046a892-35e6-4c8d-8218-de480a676e67-50.jpg 57-3040 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-3040)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 6 in (152 mm)
Air Filter Large End Diameter : 7.5 in (191 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-28
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 7
Couplers Included : 3
Estimated Horsepower Gain : 12.9 HP @ 6048 RPM
Horse Power Increase : 13 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RF-1048
RPM : 6048
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 8.8 lb (4 kg)
//d5otzd52uv6zz.cloudfront.net/7e8d688a-3d77-4d00-bf4f-1cb9ad18e563-50.jpg 57-3041 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-3041)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 5.75 in (146 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Oval
CARB EO Number : D-269-28
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 4
Couplers Included : 2
Estimated Horsepower Gain : 6.79 HP @ 5066 RPM
Horse Power Increase : 7 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RP-5105
RPM : 5066
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 11.7 lb (5.3 kg)
//d5otzd52uv6zz.cloudfront.net/2e71cdb4-dbea-4b43-9370-75833534713c-50.jpg 57-3042 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-3042)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 6 in (152 mm)
Air Filter Large End Diameter : 7.5 in (191 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-34
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 7
Couplers Included : 3
Estimated Horsepower Gain : 14.24 HP @ 6283 RPM
Horse Power Increase : 14 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RF-1048
RPM : 6283
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 9.1 lb (4.1 kg)
//d5otzd52uv6zz.cloudfront.net/148b3b23-f1b5-4e9e-bf9c-b089b2680485-50.jpg 57-3043 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-3043)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 6 in (152 mm)
Air Filter Large End Diameter : 7.5 in (191 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-34
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 5
Couplers Included : 2
Estimated Horsepower Gain : 18.57 HP @ 6001 RPM
Horse Power Increase : 19 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RF-1048
RPM : 6001
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 11.3 lb (5.1 kg)
//d5otzd52uv6zz.cloudfront.net/fbbd91e2-8dfd-4cc3-883f-bd3662256d5c-50.jpg 57-3044 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-3044)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 6 in (152 mm)
Air Filter Large End Diameter : 7.5 in (191 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-31
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 7
Couplers Included : 3
Estimated Horsepower Gain : 18.55 HP @ 5818 RPM
Horse Power Increase : 19 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RF-1048
RPM : 5818
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 9.8 lb (4.4 kg)
//d5otzd52uv6zz.cloudfront.net/70c2a447-7584-4288-8562-8a86cf2711e8-50.jpg 57-3045 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-3045)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 7.5 in (191 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-31
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 3
Couplers Included : 1
Estimated Horsepower Gain : 13.34 HP @ 5224 RPM
Horse Power Increase : 13 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RF-1040
RPM : 5224
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 9.4 lb (4.3 kg)
//d5otzd52uv6zz.cloudfront.net/0941e969-47ea-40ca-a260-884e21f1058b-50.jpg 57-3046 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-3046)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 6 in (152 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-31
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 6
Couplers Included : 3
Estimated Horsepower Gain : 5.39 HP @ 5200 RPM
Horse Power Increase : 5 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RP-5115
RPM : 5200
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 10 lb (4.5 kg)
//d5otzd52uv6zz.cloudfront.net/0cfcd989-ad52-4f16-bce8-cc198cbc13b0-50.jpg 57-3047 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-3047)
FIPK Intake Kit
w/ Panel Filter
Air Filter Color : Red
Air Filter Height : 7.875 in (200 mm)
Air Filter Large End Diameter : 7.375 in (187 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-31
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 4
Couplers Included : 1
Estimated Horsepower Gain : 20.14 HP @ 3157 RPM
Horse Power Increase : 20 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RC-4900
RPM : 3157
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 13.2 lb (6 kg)
//d5otzd52uv6zz.cloudfront.net/2aae5f26-d696-4882-ac08-526c9f6061a1-50.jpg 57-3048 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-3048)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 7 in (178 mm)
Air Filter Large End Diameter : 6.5 in (165 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-31
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 8
Couplers Included : 3
Estimated Horsepower Gain : 19.25 HP @ 5133 RPM
Horse Power Increase : 19 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RF-1032
RPM : 5133
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 7.3 lb (3.3 kg)
//d5otzd52uv6zz.cloudfront.net/fa8ce880-0aba-49df-b5fa-44efe62478bd-50.jpg 57-3049 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-3049)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 6 in (152 mm)
Air Filter Large End Diameter : 7.5 in (191 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-37
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 8
Couplers Included : 3
Estimated Horsepower Gain : 16.78 HP @ 5248 RPM
Horse Power Increase : 17 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RF-1048
RPM : 5248
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 11.1 lb (5 kg)
//d5otzd52uv6zz.cloudfront.net/d9dce9fc-9b34-4a93-8f45-e88aa98969b7-50.jpg 57-3050 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-3050)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 7.5 in (191 mm)
Air Filter Large End Diameter : 7.5 in (191 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-34
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 5
Couplers Included : 2
Estimated Horsepower Gain : 11.93 HP @ 5367 RPM
Horse Power Increase : 12 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RF-1041
RPM : 5367
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 11.7 lb (5.3 kg)
//d5otzd52uv6zz.cloudfront.net/fa07e2aa-6e2b-4c45-972c-d885ebc18147-50.jpg 57-3051 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-3051)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 6 in (152 mm)
Air Filter Large End Diameter : 7.5 in (191 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-34
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 6
Couplers Included : 2
Estimated Horsepower Gain : 11.48 HP @ 5863 RPM
Horse Power Increase : 11 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RF-1048
RPM : 5863
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 12.4 lb (5.6 kg)
//d5otzd52uv6zz.cloudfront.net/bf977d99-2a30-4c49-a67a-152a320a678e-50.jpg 57-3052 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-3052)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 4.813 in (122 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Oval
CARB EO Number : D-269-31
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 4
Couplers Included : 2
Estimated Horsepower Gain : 10.05 HP @ 6000 RPM
Horse Power Increase : 10 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RP-5135
RPM : 6000
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 8.3 lb (3.7 kg)
//d5otzd52uv6zz.cloudfront.net/0da01004-2bc2-4d52-930e-2208478b2f30-50.jpg 57-3053 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-3053)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 6 in (152 mm)
Air Filter Large End Diameter : 7.5 in (191 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-31
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 5
Couplers Included : 2
Estimated Horsepower Gain : 13.96 HP @ 5700 RPM
Horse Power Increase : 14 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RF-1048
RPM : 5700
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 10.5 lb (4.8 kg)
//d5otzd52uv6zz.cloudfront.net/f7f7a83f-736a-484a-9b28-d14eeac33985-50.jpg 57-3054 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-3054)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 5 in (127 mm)
Air Filter Large End Diameter : 7.5 in (191 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-34
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 5
Couplers Included : 2
Estimated Horsepower Gain : 19.14 HP @ 5100 RPM
Horse Power Increase : 19 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RC-2960
RPM : 5100
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 9.5 lb (4.3 kg)
//d5otzd52uv6zz.cloudfront.net/dc8a9585-d1dd-4f59-9485-42ffdfe152af-50.jpg 57-3055 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-3055)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 6 in (152 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-34
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 6
Couplers Included : 3
Estimated Horsepower Gain : 13.76 HP @ 4700 RPM
Horse Power Increase : 14 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RP-5115
RPM : 4700
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 11.3 lb (5.1 kg)
//d5otzd52uv6zz.cloudfront.net/d69564e3-9f17-41a2-8a0d-cfe502881fa0-50.jpg 57-3056 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-3056)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 6.5 in (165 mm)
Air Filter Large End Diameter : 5.375 in (137 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-38
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 3
Couplers Included : 1
Estimated Horsepower Gain : 9.33 HP @ 5325 RPM
Horse Power Increase : 9 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RC-5149
RPM : 5325
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 7.8 lb (3.6 kg)
//d5otzd52uv6zz.cloudfront.net/2981dd62-72c2-48d1-a0ca-f143053de057-50.jpg 57-3057 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-3057)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 7.5 in (191 mm)
Air Filter Large End Diameter : 9 in (229 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-34
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 3
Couplers Included : 1
Estimated Horsepower Gain : 22.09 HP @ 2860 RPM
Horse Power Increase : 22 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Oversize Shipping : OS1
Replacement Filter : RC-5179
RPM : 2860
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 11.3 lb (5.1 kg)
//d5otzd52uv6zz.cloudfront.net/e84f1be5-8452-45b8-8bee-1018ce611171-50.jpg 57-3058 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-3058)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 6.5 in (165 mm)
Air Filter Large End Diameter : 7.5 in (191 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-37
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 7
Couplers Included : 3
Estimated Horsepower Gain : 17.55 HP @ 4917 RPM
Horse Power Increase : 18 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RF-1042
RPM : 4917
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 12.4 lb (5.7 kg)
//d5otzd52uv6zz.cloudfront.net/a688e954-2d17-4892-a3d1-a5cba97f7e44-50.jpg 57-3061 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-3061)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 7 in (178 mm)
Air Filter Large End Diameter : 6.5 in (165 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-37
Clamp Material : Stainless Steel
Clamp Style : MIDI
Clamps Included : 5
Couplers Included : 2
Estimated Horsepower Gain : 19.18 HP @ 5331 RPM
Horse Power Increase : 19 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RF-1032
RPM : 5331
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 10.2 lb (4.6 kg)
//d5otzd52uv6zz.cloudfront.net/c146b307-824a-4b44-b90f-765718d46bb4-50.jpg 57-3062 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-3062)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 6.5 in (165 mm)
Air Filter Large End Diameter : 6 in (152 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-34
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 4
Couplers Included : 1
Estimated Horsepower Gain : 9.5 HP @ 4725 RPM
Horse Power Increase : 10 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RU-4730
RPM : 4725
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 6.8 lb (3.1 kg)
//d5otzd52uv6zz.cloudfront.net/88bdf2da-1765-4207-8de6-b8769384dd93-50.jpg 57-3063 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-3063)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 6.5 in (165 mm)
Air Filter Large End Diameter : 7.5 in (191 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-34
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 7
Couplers Included : 3
Estimated Horsepower Gain : 11.62 HP @ 5075 RPM
Horse Power Increase : 12 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RF-1042
RPM : 5075
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 12.1 lb (5.5 kg)
//d5otzd52uv6zz.cloudfront.net/c18ec7d0-ddc1-403d-b3c0-32398eda9052-50.jpg 57-3066 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-3066)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 7.5 in (191 mm)
Air Filter Large End Diameter : 9 in (229 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-36
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 3
Couplers Included : 1
Estimated Horsepower Gain : 19.67 HP @ 2900 RPM
Horse Power Increase : 20 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Oversize Shipping : OS1
Replacement Filter : RC-5179
RPM : 2900
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 14.8 lb (6.7 kg)
//d5otzd52uv6zz.cloudfront.net/172a8ff8-0989-4ac0-ae13-096a93fefaab-50.jpg 57-3069 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-3069)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 6.125 in (156 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-49
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 5
Couplers Included : 2
Estimated Horsepower Gain : 9.4 HP @ 5068 RPM
Horse Power Increase : 9 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : E-1989
RPM : 5068
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 6.1 lb (2.8 kg)
//d5otzd52uv6zz.cloudfront.net/group-9e77fa46-2f6c-4db0-9321-24541c4b98da-50.jpg 57-3070 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-3070)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 6.5 in (165 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-38/49
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 5
Couplers Included : 2
Estimated Horsepower Gain : 10.25 HP @ 5342 RPM
Horse Power Increase : 10 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RF-1042XD
RPM : 5342
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 13.2 lb (6 kg)
//d5otzd52uv6zz.cloudfront.net/fadc24f9-29e4-486c-b1f8-1561ebebde82-50.jpg 57-3074 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-3074)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 1.625 in (41 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Not Flanged
CARB EO Number : D-269-49
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 4
Couplers Included : 2
Estimated Horsepower Gain : 6.54 HP @ 5844 RPM
Horse Power Increase : 7 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : 33-2434
RPM : 5844
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 6.2 lb (2.8 kg)
//d5otzd52uv6zz.cloudfront.net/74972f40-35f5-49d5-b242-594545e59dd2-50.jpg 57-3075 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-3075)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 1.625 in (41 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Not Flanged
CARB EO Number : D-269-49
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 4
Couplers Included : None
Estimated Horsepower Gain : 4.84 HP @ 6045 RPM
Horse Power Increase : 5 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : 33-2434
RPM : 6045
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 5.6 lb (2.6 kg)
//d5otzd52uv6zz.cloudfront.net/63b2769c-f77c-487d-a334-bbb33f4a7e73-50.jpg 57-3077 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-3077)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 7.5 in (191 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-49
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 7
Couplers Included : 3
Estimated Horsepower Gain : 19.34 HP @ 2420 RPM
Horse Power Increase : 19 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RC-5179
RPM : 2420
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 15.8 lb (7.2 kg)
//d5otzd52uv6zz.cloudfront.net/e8248693-f46a-4814-8c3d-fc01766b47d3-50.jpg 57-3078 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-3078)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 6.5 in (165 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-49
Clamp Material : Steel
Clamp Style : Regular
Clamps Included : 5
Couplers Included : 2
Estimated Horsepower Gain : 13.14 HP @ 5800 RPM
Horse Power Increase : 13 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RC-5107
RPM : 5800
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 11.7 lb (5.3 kg)
//d5otzd52uv6zz.cloudfront.net/7c1974d8-f3a3-49a9-87d9-b98e6d9a7e9c-50.jpg 57-3079 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-3079)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 6 in (152 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-49
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 5
Couplers Included : 2
Intake Pipe Color / Finish : Black
Intake Pipe Material : Carbon Fiber
Mounting Hardware Included : Yes
Replacement Filter : RP-5168
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 8.8 lb (4 kg)
//d5otzd52uv6zz.cloudfront.net/2c9dddd7-c62e-4151-9ee6-1d77556e8b8a-50.jpg 57-3500 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-3500)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 7.5 in (191 mm)
Air Filter Large End Diameter : 5.375 in (137 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-8
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 2
Couplers Included : None
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RF-1007
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen I
Weight : 3.1 lb (1.4 kg)
//d5otzd52uv6zz.cloudfront.net/3d82f740-a510-486d-a02a-9e3b13321ee7-50.jpg 57-3501 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-3501)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 4.5 in (114 mm)
Air Filter Large End Diameter : 5.875 in (149 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-8
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 2
Couplers Included : None
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RF-1005
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen I
Weight : 3.2 lb (1.5 kg)
//d5otzd52uv6zz.cloudfront.net/9c7343cd-35f8-4d32-bdf3-d7ca665db82d-50.jpg 57-3502 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-3502)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 5 in (127 mm)
Air Filter Large End Diameter : 7.5 in (191 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-8
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 2
Couplers Included : None
Mounting Hardware Included : Yes
Replacement Filter : RC-2960
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen I
Weight : 4 lb (1.8 kg)
//d5otzd52uv6zz.cloudfront.net/17f25212-6577-48ad-a1e3-d413fe73441b-50.jpg 57-3503 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-3503)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 7.5 in (191 mm)
Air Filter Large End Diameter : 5.375 in (137 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-8
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 1
Couplers Included : None
Estimated Horsepower Gain : 4.39 HP @ 5416 RPM
Horse Power Increase : 4 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RF-1007
RPM : 5416
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen I
Weight : 4.1 lb (1.8 kg)
//d5otzd52uv6zz.cloudfront.net/4ae72ebf-cb21-4285-9a63-b42231fd27ec-50.jpg 57-3504 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-3504)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 8.375 in (213 mm)
Air Filter Large End Diameter : 5.875 in (149 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Not Flanged
CARB EO Number : D-269-8
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 1
Couplers Included : None
Estimated Horsepower Gain : 3.72 HP @ 6100 RPM
Horse Power Increase : 4 HP
Mounting Hardware Included : Yes
Replacement Filter : RF-1008
RPM : 6100
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen I
Weight : 1.6 lb (0.7 kg)
//d5otzd52uv6zz.cloudfront.net/c9e79324-eedb-43f8-9bd1-d23c3abd54dc-50.jpg 57-3506 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-3506)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 6 in (152 mm)
Air Filter Large End Diameter : 7.5 in (191 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Not Flanged
CARB EO Number : D-269-8
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 1
Couplers Included : None
Estimated Horsepower Gain : 6.11 HP @ 6300 RPM
Horse Power Increase : 6 HP
Mounting Hardware Included : Yes
Replacement Filter : RF-1013
RPM : 6300
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen I
Weight : 5.3 lb (2.4 kg)
//d5otzd52uv6zz.cloudfront.net/a9ccb5f4-a9ae-41ff-9fbe-319bc3c68d38-50.jpg 57-3509 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-3509)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 6.5 in (165 mm)
Air Filter Large End Diameter : 5 in (127 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-25
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 4
Couplers Included : 1
Estimated Horsepower Gain : 5.52 HP @ 7200 RPM
Horse Power Increase : 6 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RF-1030
RPM : 7200
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 6.4 lb (2.9 kg)
//d5otzd52uv6zz.cloudfront.net/466cf865-ac26-4485-ad68-ba2d20b787c3-50.jpg 57-3512 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-3512)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 6 in (152 mm)
Air Filter Large End Diameter : 5.375 in (137 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-17
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 4
Couplers Included : 1
Estimated Horsepower Gain : 5.77 HP @ 7500 RPM
Horse Power Increase : 6 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RC-4550
RPM : 7500
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 8 lb (3.6 kg)
//d5otzd52uv6zz.cloudfront.net/617c737b-7748-40c2-9f55-4ea6aa46b08c-50.jpg 57-3513 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-3513)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 7 in (178 mm)
Air Filter Large End Diameter : 5.375 in (137 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-31
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 3
Couplers Included : 1
Estimated Horsepower Gain : 4.8 HP @ 6200 RPM
Horse Power Increase : 5 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RP-4970
RPM : 6200
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 8.7 lb (3.9 kg)
//d5otzd52uv6zz.cloudfront.net/f152a024-9d5b-40ca-96a2-673bfcfdd44e-50.jpg 57-3514 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-3514)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 6.5 in (165 mm)
Air Filter Large End Diameter : 5.375 in (137 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-38
Clamp Material : Stainless Steel
Clamp Style : Mini
Clamps Included : 7
Couplers Included : 2
Estimated Horsepower Gain : 9.56 HP @ 6400 RPM
Horse Power Increase : 10 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RP-4980
RPM : 6400
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 10.9 lb (4.9 kg)
//d5otzd52uv6zz.cloudfront.net/9a0e580e-87c4-478a-8cf2-ae9c51ed380c-50.jpg 57-3515 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-3515)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 8 in (203 mm)
Air Filter Large End Diameter : 5.5 in (140 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-37
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 3
Couplers Included : 1
Estimated Horsepower Gain : 10.69 HP @ 5159 RPM
Horse Power Increase : 11 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RC-4760
RPM : 5159
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 8.7 lb (3.9 kg)
//d5otzd52uv6zz.cloudfront.net/69382425-e040-4265-b3c7-4ce084ac5243-50.jpg 57-5001 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-5001)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 4 in (102 mm)
Air Filter Large End Diameter : 7.5 in (191 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-3
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 1
Couplers Included : None
Estimated Horsepower Gain : 4.08 HP @ 5828 RPM
Horse Power Increase : 4 HP
Mounting Hardware Included : Yes
Replacement Filter : RF-1009
RPM : 5828
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen I
Weight : 5.4 lb (2.5 kg)
//d5otzd52uv6zz.cloudfront.net/b153b9af-f90e-4e09-bfc6-72d4353cc4bc-50.jpg 57-5005 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-5005)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 3.25 in (83 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-3
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 2
Couplers Included : None
Mounting Hardware Included : Yes
Replacement Filter : RF-1002
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen I
Weight : 3.7 lb (1.7 kg)
//d5otzd52uv6zz.cloudfront.net/a0edfe78-fc52-4d03-96d2-812da3e97d86-50.jpg 57-5500 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-5500)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 6 in (152 mm)
Air Filter Large End Diameter : 8 in (203 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Not Flanged
CARB EO Number : D-269-5
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 2
Couplers Included : None
Mounting Hardware Included : Yes
Replacement Filter : RF-1022
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen I
Weight : 3.7 lb (1.7 kg)
//d5otzd52uv6zz.cloudfront.net/6ae07df4-ecca-4c41-b0c2-9b9e7521da87-50.jpg 57-5504-1 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-5504-1)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 6.75 in (171 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Not Flanged
CARB EO Number : D-269-15
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 1
Couplers Included : None
Estimated Horsepower Gain : 7.74 HP @ 5900 RPM
Horse Power Increase : 8 HP
Mounting Hardware Included : Yes
Replacement Filter : RF-1019
RPM : 5900
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen I
Weight : 3.5 lb (1.6 kg)
//d5otzd52uv6zz.cloudfront.net/f3853573-54d2-4d28-bd77-87bcc764f069-50.jpg 57-5505 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-5505)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 5 in (127 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Oval
CARB EO Number : D-269-31
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 7
Couplers Included : 2
Estimated Horsepower Gain : 5.37 HP @ 5500 RPM
Horse Power Increase : 5 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RF-1001
RPM : 5500
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 7.4 lb (3.4 kg)
//d5otzd52uv6zz.cloudfront.net/dbf1d452-84be-4b7d-a769-1e167e516a9d-50.jpg 57-6000 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-6000)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 5 in (127 mm)
Air Filter Large End Diameter : 7.5 in (191 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-3
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 3
Couplers Included : None
Mounting Hardware Included : Yes
Replacement Filter : RC-2960
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen I
Weight : 3.8 lb (1.7 kg)
//d5otzd52uv6zz.cloudfront.net/f0fdc39e-e044-46a2-913f-1d28c97ec9a0-50.jpg 57-6001 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-6001)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 7 in (178 mm)
Air Filter Large End Diameter : 7.5 in (191 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Not Flanged
CARB EO Number : D-269-3
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 1
Couplers Included : None
Mounting Hardware Included : Yes
Replacement Filter : RF-1010
Street Legal In All US States : See Application Link Above
TUV Approved (Europe) : No
Type : Gen I
Weight : 4 lb (1.8 kg)
//d5otzd52uv6zz.cloudfront.net/526713ca-865d-445f-90ca-b740ab0734b3-50.jpg 57-6002 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-6002)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 11.375 in (289 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-8
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 1
Couplers Included : None
Mounting Hardware Included : Yes
Replacement Filter : RF-1011
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen I
Weight : 2.9 lb (1.3 kg)
//d5otzd52uv6zz.cloudfront.net/bd9644c6-6dc8-49fc-9671-826c6f30f31c-50.jpg 57-6003 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-6003)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 5 in (127 mm)
Air Filter Large End Diameter : 7.5 in (191 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-9
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 2
Couplers Included : None
Mounting Hardware Included : Yes
Replacement Filter : RC-2960
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen I
Weight : 3.5 lb (1.6 kg)
//d5otzd52uv6zz.cloudfront.net/2cf5cce9-9058-4019-a3e5-a94e27f32377-50.jpg 57-6005 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-6005)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 6.5 in (165 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-28
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 5
Couplers Included : 3
Estimated Horsepower Gain : 5.48 HP @ 4847 RPM
Horse Power Increase : 5 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RX-4750
RPM : 4847
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 9.5 lb (4.3 kg)
//d5otzd52uv6zz.cloudfront.net/2d6f0037-29a1-4f84-871b-61831dba54b1-50.jpg 57-6010 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-6010)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 6.5 in (165 mm)
Air Filter Large End Diameter : 6.5 in (165 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-28
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 6
Couplers Included : 2
Estimated Horsepower Gain : 12.73 HP @ 4824 RPM
Horse Power Increase : 13 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RF-1037
RPM : 4824
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 8.5 lb (3.9 kg)
//d5otzd52uv6zz.cloudfront.net/bd43bcf6-a856-40f7-98ae-cb5bc4c45ea7-50.jpg 57-6011 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-6011)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 6.5 in (165 mm)
Air Filter Large End Diameter : 6.5 in (165 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-28
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 6
Couplers Included : 2
Estimated Horsepower Gain : 14.46 HP @ 5918 RPM
Horse Power Increase : 14 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RF-1037
RPM : 5918
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 9.4 lb (4.3 kg)
//d5otzd52uv6zz.cloudfront.net/ad84cb15-98e8-474f-8526-3f90be620d70-50.jpg 57-6012 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-6012)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 8 in (203 mm)
Air Filter Large End Diameter : 7.5 in (191 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-38/47
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 6
Couplers Included : 2
Estimated Horsepower Gain : 11.21 HP @ 5073 RPM
Horse Power Increase : 11 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RF-1044
RPM : 5073
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 12 lb (5.4 kg)
//d5otzd52uv6zz.cloudfront.net/476f626c-f9ba-4c1d-bb94-05b28e8294db-50.jpg 57-6013 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-6013)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 6.5 in (165 mm)
Air Filter Large End Diameter : 6.5 in (165 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-34
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 6
Couplers Included : 2
Estimated Horsepower Gain : 10.65 HP @ 5500 RPM
Horse Power Increase : 11 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RF-1037
RPM : 5500
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 9.7 lb (4.4 kg)
//d5otzd52uv6zz.cloudfront.net/d5d70b4b-f4f1-4d17-bf6a-af015bab4585-50.jpg 57-6014 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-6014)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 6.5 in (165 mm)
Air Filter Large End Diameter : 7.5 in (191 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-47
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 5
Couplers Included : 2
Estimated Horsepower Gain : 14.27 HP @ 5075 RPM
Horse Power Increase : 14 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Oversize Shipping : OS1
Replacement Filter : RF-1014
RPM : 5075
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 14.3 lb (6.5 kg)
//d5otzd52uv6zz.cloudfront.net/6be67ec3-f68f-4787-8308-7cd6371ee896-50.jpg 57-7000 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-7000)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 6.5 in (165 mm)
Air Filter Large End Diameter : 5.5 in (140 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-34
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 4
Couplers Included : 1
Estimated Horsepower Gain : 23.8 HP @ 5500 RPM
Horse Power Increase : 24 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RP-4630
RPM : 5500
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 9.7 lb (4.4 kg)
//d5otzd52uv6zz.cloudfront.net/bde5bbd4-9f32-42f5-a545-b0b07b920f46-50.jpg 57-7001 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-7001)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 6.75 in (171 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-37
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 5
Couplers Included : 2
Estimated Horsepower Gain : 24.65 HP @ 6726 RPM
Horse Power Increase : 25 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RP-5167
RPM : 6726
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 8.8 lb (4 kg)
//d5otzd52uv6zz.cloudfront.net/4378fe1c-10a6-4c21-b26c-835950e8ef29-50.jpg 57-9000 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-9000)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 3.25 in (83 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-8
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 1
Couplers Included : None
Mounting Hardware Included : Yes
Replacement Filter : RF-1002
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen I
Weight : 3.8 lb (1.7 kg)
//d5otzd52uv6zz.cloudfront.net/3f0f6fd4-9176-4ea5-96d9-a8bbf11150e1-50.jpg 57-9001 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-9001)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 4 in (102 mm)
Air Filter Large End Diameter : 7.5 in (191 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-8
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 1
Couplers Included : None
Estimated Horsepower Gain : 6.07 HP @ 5500 RPM
Horse Power Increase : 6 HP
Mounting Hardware Included : Yes
Replacement Filter : RF-1009
RPM : 5500
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen I
Weight : 3.9 lb (1.8 kg)
//d5otzd52uv6zz.cloudfront.net/af2b307d-8a35-44e9-963a-5c5bacd282bc-50.jpg 57-9004 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-9004)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 5 in (127 mm)
Air Filter Large End Diameter : 7.5 in (191 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-40
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 1
Couplers Included : None
Estimated Horsepower Gain : 8.29 HP @ 5306 RPM
Horse Power Increase : 8 HP
Mounting Hardware Included : Yes
Replacement Filter : RC-2960
RPM : 5306
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen I
Weight : 3.5 lb (1.6 kg)
//d5otzd52uv6zz.cloudfront.net/33644f4c-3c55-418b-8633-973eb89b21d5-50.jpg 57-9005 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-9005)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 5 in (127 mm)
Air Filter Large End Diameter : 7.5 in (191 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-3
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 2
Couplers Included : None
Mounting Hardware Included : Yes
Replacement Filter : RC-2960
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen I
Weight : 3.5 lb (1.6 kg)
//d5otzd52uv6zz.cloudfront.net/3c2b7eb4-464b-45d7-826c-fc597a5e82c8-50.jpg 57-9006 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-9006)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 4 in (102 mm)
Air Filter Large End Diameter : 7.5 in (191 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-8
Clamp Material : Stainless Steel
Clamp Style : Mini
Clamps Included : 3
Couplers Included : None
Estimated Horsepower Gain : 3.33 HP @ 4405 RPM
Horse Power Increase : 3 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RF-1009
RPM : 4405
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen I
Weight : 4.6 lb (2.1 kg)
//d5otzd52uv6zz.cloudfront.net/1758ecc2-0414-493f-8987-dc76dd193784-50.jpg 57-9008 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-9008)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 4 in (102 mm)
Air Filter Large End Diameter : 7.5 in (191 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-8
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 2
Couplers Included : None
Estimated Horsepower Gain : 5.13 HP @ 4700 RPM
Horse Power Increase : 5 HP
Mounting Hardware Included : Yes
Replacement Filter : RF-1009
RPM : 4700
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen I
Weight : 3.8 lb (1.7 kg)
//d5otzd52uv6zz.cloudfront.net/124f803a-2196-4934-aa10-a91b11d9f408-50.jpg 57-9011 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-9011)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 6.5 in (165 mm)
Air Filter Large End Diameter : 5.5 in (140 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-18
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 4
Couplers Included : 1
Estimated Horsepower Gain : 9.34 HP @ 5978 RPM
Horse Power Increase : 9 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RC-4630
RPM : 5978
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 10.4 lb (4.7 kg)
//d5otzd52uv6zz.cloudfront.net/fa4a1dea-fe1c-4256-a6ca-5baaa74e3bc1-50.jpg 57-9012 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-9012)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 6.5 in (165 mm)
Air Filter Large End Diameter : 6.5 in (165 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-15
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 5
Couplers Included : 1
Estimated Horsepower Gain : 5.67 HP @ 4727 RPM
Horse Power Increase : 6 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RF-1037
RPM : 4727
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 9.6 lb (4.4 kg)
//d5otzd52uv6zz.cloudfront.net/4075e3fa-0e59-47e3-b9c9-4937a9796505-50.jpg 57-9013 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-9013)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 7 in (178 mm)
Air Filter Large End Diameter : 7.5 in (191 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-15
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 6
Couplers Included : 1
Estimated Horsepower Gain : 6.22 HP @ 4848 RPM
Horse Power Increase : 6 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RF-1029
RPM : 4848
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 8.9 lb (4 kg)
//d5otzd52uv6zz.cloudfront.net/group-9e77fa46-2f6c-4db0-9321-24541c4b98da-50.jpg 57-9014-1 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-9014-1)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 8 in (203 mm)
Air Filter Large End Diameter : 5.5 in (140 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-20
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 4
Couplers Included : 1
Estimated Horsepower Gain : 14.2 HP @ 5027 RPM
Horse Power Increase : 14 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RF-1045
RPM : 5027
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 12.4 lb (5.6 kg)
//d5otzd52uv6zz.cloudfront.net/c45d18b4-89dc-4189-8901-a13282c1f38b-50.jpg 57-9015-1 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-9015-1)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 6.75 in (171 mm)
Air Filter Large End Diameter : 6 in (152 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-28
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 6
Couplers Included : 3
Estimated Horsepower Gain : 9.45 HP @ 4842 RPM
Horse Power Increase : 9 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RC-4700
RPM : 4842
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 8.4 lb (3.8 kg)
//d5otzd52uv6zz.cloudfront.net/e433a32c-0e13-4d08-8dcf-052cf2bf1c9a-50.jpg 57-9016-1 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-9016-1)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 6.5 in (165 mm)
Air Filter Large End Diameter : 6.5 in (165 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-28
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 5
Couplers Included : 2
Estimated Horsepower Gain : 6.19 HP @ 4200 RPM
Horse Power Increase : 6 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RF-1037
RPM : 4200
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 10.9 lb (5 kg)
//d5otzd52uv6zz.cloudfront.net/3f2a0992-6a04-41f0-bc9b-a2a6476121da-50.jpg 57-9017 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-9017)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 8 in (203 mm)
Air Filter Large End Diameter : 5.5 in (140 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-19
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 4
Couplers Included : 1
Estimated Horsepower Gain : 11.73 HP @ 5108 RPM
Horse Power Increase : 12 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RF-1045
RPM : 5108
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 12.4 lb (5.6 kg)
//d5otzd52uv6zz.cloudfront.net/be287638-768e-4d63-a9b5-7c09e65efd79-50.jpg 57-9018 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-9018)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 6.5 in (165 mm)
Air Filter Large End Diameter : 5.375 in (137 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-31
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 5
Couplers Included : 1
Estimated Horsepower Gain : 9.45 HP @ 5726 RPM
Horse Power Increase : 9 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RP-4980
RPM : 5726
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 9.5 lb (4.3 kg)
//d5otzd52uv6zz.cloudfront.net/04e97031-f1db-4b74-9f1c-19762714b1e4-50.jpg 57-9019 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-9019)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 6.75 in (171 mm)
Air Filter Large End Diameter : 6 in (152 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-28
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 4
Couplers Included : 3
Estimated Horsepower Gain : 5.02 HP @ 4752 RPM
Horse Power Increase : 5 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RC-4700
RPM : 4752
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 10 lb (4.5 kg)
//d5otzd52uv6zz.cloudfront.net/640c68c4-d9ce-4ac1-8bb5-400a1a48395c-50.jpg 57-9020 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-9020)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 7 in (178 mm)
Air Filter Large End Diameter : 6 in (152 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-28
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 4
Couplers Included : 1
Estimated Horsepower Gain : 13.68 HP @ 4842 RPM
Horse Power Increase : 14 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RC-5100
RPM : 4842
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 11.4 lb (5.2 kg)
//d5otzd52uv6zz.cloudfront.net/6d80ce63-1854-48d1-a897-6bfb483967ae-50.jpg 57-9021 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-9021)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 7 in (178 mm)
Air Filter Large End Diameter : 6 in (152 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-31
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 4
Couplers Included : 1
Estimated Horsepower Gain : 8.49 HP @ 4138 RPM
Horse Power Increase : 8 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RC-5100
RPM : 4138
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 12.4 lb (5.7 kg)
//d5otzd52uv6zz.cloudfront.net/bad91afc-6b49-42bc-9d98-8a772b8dd30e-50.jpg 57-9024 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-9024)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 7 in (178 mm)
Air Filter Large End Diameter : 7.5 in (191 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-28
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 7
Couplers Included : 2
Estimated Horsepower Gain : 9.06 HP @ 4847 RPM
Horse Power Increase : 9 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RF-1029
RPM : 4847
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 12.7 lb (5.8 kg)
//d5otzd52uv6zz.cloudfront.net/group-9e77fa46-2f6c-4db0-9321-24541c4b98da-50.jpg 57-9025 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-9025)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 6 in (152 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-52
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 5
Couplers Included : 2
Estimated Horsepower Gain : 8.91 HP @ 4857 RPM
Horse Power Increase : 9 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : RF-1048
RPM : 4857
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 13.5 lb (6.1 kg)
//d5otzd52uv6zz.cloudfront.net/1eff83ba-d740-426f-bfd6-6da8ed87955b-50.jpg 57-9027 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-9027)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 4.75 in (121 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Round
CARB EO Number : D-269-34
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 4
Couplers Included : 2
Estimated Horsepower Gain : 9.58 HP @ 4306 RPM
Horse Power Increase : 10 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : E-3034
RPM : 4306
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 8.6 lb (3.9 kg)
//d5otzd52uv6zz.cloudfront.net/group-9e77fa46-2f6c-4db0-9321-24541c4b98da-50.jpg 57-9031 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-9031)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 1.375 in (35 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Not Flanged
CARB EO Number : D-269-52
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 4
Couplers Included : 2
Estimated Horsepower Gain : 5.87 HP @ 5080 RPM
Horse Power Increase : 6 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : 33-2387
RPM : 5080
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 6.6 lb (3 kg)
//d5otzd52uv6zz.cloudfront.net/group-9e77fa46-2f6c-4db0-9321-24541c4b98da-50.jpg 57-9036 K&N Intake Kit - Fuel Injection Performance Kits (FIPK) (57-9036)
FIPK Intake Kit
Air Filter Color : Red
Air Filter Height : 1.625 in (41 mm)
Air Filter Material : Cotton Gauze
Air Filter Outlet Shape : Not Flanged
CARB EO Number : D-269-52
Clamp Material : Stainless Steel
Clamp Style : Regular
Clamps Included : 4
Couplers Included : 2
Estimated Horsepower Gain : 5.8 HP @ 5508 RPM
Horse Power Increase : 6 HP
Intake Pipe Color / Finish : Black
Intake Pipe Material : High-Density Polyethylene
Mounting Hardware Included : Yes
Replacement Filter : 33-5017
RPM : 5508
Street Legal In All US States : Yes
TUV Approved (Europe) : No
Type : Gen II
Weight : 5.7 lb (2.6 kg)

© 2020 RPMWare Inc. All Rights Reserved.
Terms of Service